• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

My New EVGA P55 LE has a Foxconn Socket. Should I worry?

Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
My New EVGA P55 LE has a Foxconn Socket. Should I worry?

Just like the title says should I worry? I am planning to overclock. Actually already have..... but I don't plan on going to the extreame end. I basically plan of just going to what the max Intel specs will allow me too. Which on the i5 is farly high. I have seen as high as 3.8Ghz or higher.

Well should I be worried or has Foxconn fixed the problem you think?
 
Last edited:
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
If you guys haven't heard there was a problem with the Foxconn Socket 1156 awhile back with overclocking. That is why I am asking? If anyone hear has had problems or heard about someone having problems.
Or was this just a very limited thing?
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
I only heard that it was on a certain batch of Gigabyte boards... If you feel calmer, I got a EVGA P55 SLI with a Foxconn socket and no problems here. I wouldn't worry except if the temps seem far too high or something.
 

theonedub

habe fidem
Joined
Apr 30, 2009
Messages
8,025 (1.47/day)
Location
Northern CA, USA
System Name Erakith || AsRock NUCS
Processor AMD ThreadRipper 2990WX ES (32c/64t 3.5ghz@1.02v) || Intel i7 1360P Raptor Lake-P
Motherboard MSI X399 MEG Creation || AsRock OE
Cooling EK Supremacy TR4 Full Nickel, D5 w/ EK Top, 2X EK-CoolStream XTX 360 & Photon 270 Res || OE
Memory 32GB (4x8GB) Corsair Vengeance PRO RGB DDR4 3000|| 2x16GB Corsair DDR4
Video Card(s) Vega 64 EK FC|| Intel Iris Xe
Storage 250gb WD Black NVMe & (2) 2TB Intel 660p NVMe || 2TB Corsair MP600 Pro
Display(s) 34" Dell Ultrasharp U3415W
Case CaseLabs Merlin SM8 || Aluminum Unibody
Power Supply Corsair HX1000
Mouse Corsair Harpoon Wireless RGB
Keyboard Corsair Strafe RGB w/ Cherry MX Silent
Software Windows 10 Pro x64 || WIndows 11 Pro x64
Benchmark Scores WCG & F@H Only
Extreme overclocks would be the only need to worry and as far as when I researched it only affected a small number of early release boards.

Like MRCL, my P55 SLI has a Foxconn and I have already taken my 860 to 3.51, so far so good. I will probably take it up to 4 some time in the future- not sweating the socket at all.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
I only heard that it was on a certain batch of Gigabyte boards... If you feel calmer, I got a EVGA P55 SLI with a Foxconn socket and no problems here. I wouldn't worry except if the temps seem far too high or something.

Extreme overclocks would be the only need to worry and as far as when I researched it only affected a small number of early release boards.

Like MRCL, my P55 SLI has a Foxconn and I have already taken my 860 to 3.51, so far so good. I will probably take it up to 4 some time in the future- not sweating the socket at all.
__________________

Thanks guys for the response! Then I will not worry then. I must be way behind the curve on this one! That is why I sounded so excited. Heard nothing about it until just tonight and thought to myself oh shit just my luck!

But that would make sense. It was probably just some bad batches!
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.46/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
I have a Foxconn on my GB-P55 UD6. When I removed my 750 all the pads had contact marks, and I had over 1.5V through my CPU on air cooling with no burn marks any irregularities at all. If we were still in the first few boards released in the P55 chipset (IE when the issue was an issue) I might even be slightly worried.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
I have a Foxconn on my GB-P55 UD6. When I removed my 750 all the pads had contact marks, and I had over 1.5V through my CPU on air cooling with no burn marks any irregularities at all. If we were still in the first few boards released in the P55 chipset (IE when the issue was an issue) I might even be slightly worried.

You make some great points! Maybe when I get a chance I should look under my CPU too make sure all the CPU pin impressions are there.
You are also probably right on the fact that it was a new design problem. Now that it has been awhile after release it has been worked out.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,409 (4.46/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
Well my GB was one of the ones in the first releases, I figure if mine is OK the newer ones "should" be fine;)
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Well my GB was one of the ones in the first releases, I figure if mine is OK the newer ones "should" be fine

I am not sure if mine was one of the ones first released? My Mob is EVGA P55 LE Rev 1.0 and the Socket is definitely Foxconn.
Now ordered the board on 12/29/2009. So there isn't really anyway to tell if the board is one of the original ones is it? Is there a way to find out the manufacture date?
 
Joined
May 31, 2008
Messages
5,787 (1.00/day)
Location
Switzerland, Heart of Europe
System Name Fractality 1.0
Processor Intel Core i7-860 @ 3.6GHz
Motherboard EVGA P55 SLI
Cooling Prolimatech Megahalems and four Fractal Design 120mm fans, sleeved
Memory 16GB Kingston Hyper RAM
Video Card(s) PNY GeForce 580 XLR8
Storage 64GB and 180GB SSDs / 1TB and 2TB HDDs
Display(s) 24" Acer V243W
Case Fractal Design Define R2, sleeved all I/O cables
Audio Device(s) onboard
Power Supply Corsair HX750W modular, sadly only stock sleeving
Software Win 7 64bit
I am not sure if mine was one of the ones first released? My Mob is EVGA P55 LE Rev 1.0 and the Socket is definitely Foxconn.
Now ordered the board on 12/29/2009. So there isn't really anyway to tell if the board is one of the original ones is it? Is there a way to find out the manufacture date?

I bought mine a month before yours. So I wouldn't worry. About the date, maybe visit the EVGA forums?
 

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.48/day)
Location
In a library somewhere on this earth
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
20mm, you really don't have anything to worry about.. There was a 50/50 chance that the evga's had the Lotas or Foxconn sockets.. Then, it wasn't but people ocing the chips to where it would even have a problem.. I really don't think that you'll have a problem with the fact that your not going to go extreme on the oc, & your doing everything smart.

Like Sneeky said. Check the CPU and see if it is catching. If it is, then don't worry.. if there is more then a dozen that isn't.. Then might need to see what can be done.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Thanks again guys!
 
Top