freaksavior
To infinity ... and beyond!
- Joined
- Dec 11, 2006
- Messages
- 8,095 (1.27/day)
System Name | ZeroUptime | M.A.S.S / MM1 |
---|---|
Processor | Xeon 2659 v3 / Xeon 2683 v4 / ARM A14 |
Motherboard | Asus X99-E-10G WS / ASRock x99 usb 3.1 / Apple |
Cooling | NZXT Kraken / Noctua NH-L12 / Apple |
Memory | 16Gb DDR4 / 32Gb DDR4 / 16GB HBLM |
Video Card(s) | Powercooler ATI vega 64 / GT 7300 / ARM |
Storage | Samsung 970 512 Evo NVMe / A lot. / 256 + 512 External TB3 |
Display(s) | Acer Predator X34 / Headless / Acer X34 Non predator |
Case | NZXT H630 |Rosewill 8bay 4u server chasiss / MMM1 |
Audio Device(s) | Onboard / Onboard / Onboard |
Power Supply | Corais HX850 | Corsair TX750 / Internal 250w |
Mouse | g502 proteus core / Headless / g502 proteus core |
Keyboard | Corsair K95 Cherry Blue / Headless / K65 Cherry Red |
Software | Windows 10 / ESXI / Big Sur 11.2.2 |
Red and Black themed once again as 4.0 was but we are going with MATX setup this time.
EVGA X58 Micro
I7 920 D0
6gb Crucial DDR3 1066
4870x2 atm
NZXT Rogue
All Cables will be sleeved in red and black.
Pics of board, and pics of case coming soon.
Plans.
Remove the pos plastic top from the case and put meshed aluminum.
make some heat spreaders (idea, not sure if im going to do it)
5 x white/red 120 mm fans
RED led's galore (i hope)
A question for someone.
I picked up 1/4th heat shrink from frys today and i was testing on some extra wire i had laying around. When i put the sleeve around the cable, then the shrink, it didn't fit snug is 1/4 the wrong size? if it is, what do i need? i found 3:1 1/4th is that what i need? i think i got 2:1
EVGA X58 Micro
I7 920 D0
6gb Crucial DDR3 1066
4870x2 atm
NZXT Rogue
All Cables will be sleeved in red and black.
Pics of board, and pics of case coming soon.
Plans.
Remove the pos plastic top from the case and put meshed aluminum.
make some heat spreaders (idea, not sure if im going to do it)
5 x white/red 120 mm fans
RED led's galore (i hope)
A question for someone.
I picked up 1/4th heat shrink from frys today and i was testing on some extra wire i had laying around. When i put the sleeve around the cable, then the shrink, it didn't fit snug is 1/4 the wrong size? if it is, what do i need? i found 3:1 1/4th is that what i need? i think i got 2:1