brandonwh64
Addicted to Bacon and StarCrunches!!!
- Joined
- Sep 6, 2009
- Messages
- 19,542 (3.66/day)
Ok i bought a DFI 790FX board from T77 that was dead. My plan was to figure out what was wrong with it and fix it the best i could. If i couldnt fix it i was gonna use it as a soldering experiment. Well i first took out the Cmos Battery when i got the board and left it out for 24 hours. I then checked the board in a bright light environment to see if there was a burnt place which there wassnt so when i went to replace the CMOS batter i noticed some corrosion on the contacts of the + side of the battery. I then took a sanding block and smoothed it out back down to the metal and reinstalled. Well to my surprise the board booted first time with a 8400GS and 1 stick of 2gb DDR2-800!!! im so excited! THANKS T77!!!
This first picture you cannot see the screen well but it was on the post screen.
This second picture you i turned the monitor around so you can see the post screen!
This first picture you cannot see the screen well but it was on the post screen.
This second picture you i turned the monitor around so you can see the post screen!