de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 8,783 (1.74/day)
- Location
- Stuck in a PC. halp.
| System Name | Monke | Work Thinkpad| Old Monke |
|---|---|
| Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
| Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
| Cooling | 240mm Rad | Not needed | hyper 212 EVO |
| Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
| Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
| Storage | Samsung 980 nvme (Primary) | some samsung SSD |
| Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
| Case | Ant Esports Tempered case | Thinkpad | Antec |
| Audio Device(s) | Logitech Z333 | Jabra corpo stuff |
| Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
| Mouse | Logitech G400 | nipple |
| Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
| VR HMD | ;_; |
| Software | Windows 10 Professional x3 |
| Benchmark Scores | There are no marks on my bench |
hey guys this will be my first MOD.
i am starting by dremelling out some side fan pockets in the side panel.
here is an BEFORE picture.
the pant job was already custom, did when i was 16. i did some gold work and gold brushed metal finishes.
Andsorry, but i dont have a camera. i spent all my money on PC parts and tools.
Here's the gap for two 90mm fans side by side marked and ready to be dremelled.
first time to dremel.... here goes.
Hmmm... its perfect!
PHASE I complete by practicing by making two holes for fans!
PHASE II
now i will make a larger hole, rectangular, put a rectangular piece of aluminium sheet and the sheet will probably have custom made designer mesh.(i need to practice more first) and i may have to postpone for my first engg exams.
finished cutting for the aluminium holder to goto.
Aluminium piece cut and glued in place.
Fan holes marked and ready to be dremeled out.
Fan holes cut and fans placed.
Outside view(in light)(bad quality of pics,.... my cell phone-2MP- broke and we dont have enough money to buy a new camera. this is a vga camera)
Outside view(in dark)
i am starting by dremelling out some side fan pockets in the side panel.
here is an BEFORE picture.
the pant job was already custom, did when i was 16. i did some gold work and gold brushed metal finishes.
Andsorry, but i dont have a camera. i spent all my money on PC parts and tools.
Here's the gap for two 90mm fans side by side marked and ready to be dremelled.
first time to dremel.... here goes.
Hmmm... its perfect!
PHASE I complete by practicing by making two holes for fans!
PHASE II
now i will make a larger hole, rectangular, put a rectangular piece of aluminium sheet and the sheet will probably have custom made designer mesh.(i need to practice more first) and i may have to postpone for my first engg exams.
finished cutting for the aluminium holder to goto.
Aluminium piece cut and glued in place.
Fan holes marked and ready to be dremeled out.
Fan holes cut and fans placed.
Outside view(in light)(bad quality of pics,.... my cell phone-2MP- broke and we dont have enough money to buy a new camera. this is a vga camera)
Outside view(in dark)
Last edited:
