- Joined
- Sep 4, 2009
- Messages
- 109 (0.02/day)
- Location
- On a dot in the sky, playin my geetar...
System Name | Reaper |
---|---|
Processor | AMD 8350 @4.8ghz |
Motherboard | Asus Rog Crosshair V Formula Z |
Cooling | Custom water cooling |
Memory | 16gb Corsair Vengeance Pro 2400 |
Video Card(s) | Evga Gtx 970 Ftw X2 in SLI |
Storage | Samsung evo 250gb ssd(Win10), Crucial 120gb ssd(Win7), WD Caviar black 800gb, Wd Blue 1tb |
Display(s) | 32' inch Samsung |
Case | Corsair Obsidian 800D modded |
Audio Device(s) | Built into Motherboard soundblaster |
Power Supply | EVGA Supernova 850b2 |
Mouse | EVGA Torq X10 Carbon fiber |
Keyboard | LOGITECH G910 rgb |
Software | Win7 ultimate + Win 10 Pro |
Benchmark Scores | https://pcpartpicker.com/user/Reaper_v3.4/builds/ |
Ok, this is my first work log, first water cooled set up and my first GPU mod. I just purchased all the components and the case that I've had my eye on & i have begun modding the gpu's stock heat-sinks to accept the Enzotech water-blocks. I'm going to be running 3/8 ID tubing (5/8 OD), 3/8 barbs, and a whole list of stuff. Any ideas and input with this build will be greatly appreciated. This project is a work in progress as I've had the components for over a week and I'm now getting past the planning stage and into the build.
The Hardware List:
Corsair Obsidian 800D
Asus M3N-HT HDMI/Deluxe 780a tri-sli mobo
AMD Phenom 2 X4 955 BE C3
2X2gb sticks of OCZ Fatal1ty series DDR2 800mhz
2X EVGA 9800GTX+'s 512mb DDR3
Corsair 850TX psu
Dual Boot OS:
WD SE16 250gb with Win XP SP3
WD Caviar Black 750gb with Win 7 Ultimate 64-bit
LG 24X DL DVD
Water Cooling List:
Enzotech SCW-REV.A CPU Waterblock
EK multi-op Res X2 250
Danger Den 3/8 barbs + one 1/2
Danger Den Delrin t-fitting
Swiftech 1/2" Aluminum Remote Fill-Port Fitting, gotta exchange it for copper or brass.....
10 feet 3/8 ID, 5/8 OD with 1/8 wall + 1 foot 1/2 ID tubing for drain both UV black
Danger Den Black Ice GT Stealth 120 Rad plus 360 rad
2X Enzotech VGA-IS
Danger Den DD-CPX1 12V 3-Pin Powered Pump
PrimoChill Anti-Kink Coils - 1/2 OD" Tubing - UV Blue
Feser Aqua Non Conductive Ultra Pure Water
IandH Silver KillCoils
Feser Base Corrosion Blocker
here's the hardware
the stock heatsink modded to allow the water block to fit...
water block mounted
water block with the stock heatsink floating, testing for fit. I still need to smooth out the fins with my dremel, and check the clearance of the plastic shroud and the water block. I'm probably going to have to cut a portion of it out.
http://img.techpowerup.org/100825/IMG00103-20100824-2030.jpg
The Obsidian 800D
The Hardware List:
Corsair Obsidian 800D
Asus M3N-HT HDMI/Deluxe 780a tri-sli mobo
AMD Phenom 2 X4 955 BE C3
2X2gb sticks of OCZ Fatal1ty series DDR2 800mhz
2X EVGA 9800GTX+'s 512mb DDR3
Corsair 850TX psu
Dual Boot OS:
WD SE16 250gb with Win XP SP3
WD Caviar Black 750gb with Win 7 Ultimate 64-bit
LG 24X DL DVD
Water Cooling List:
Enzotech SCW-REV.A CPU Waterblock
EK multi-op Res X2 250
Danger Den 3/8 barbs + one 1/2
Danger Den Delrin t-fitting
Swiftech 1/2" Aluminum Remote Fill-Port Fitting, gotta exchange it for copper or brass.....
10 feet 3/8 ID, 5/8 OD with 1/8 wall + 1 foot 1/2 ID tubing for drain both UV black
Danger Den Black Ice GT Stealth 120 Rad plus 360 rad
2X Enzotech VGA-IS
Danger Den DD-CPX1 12V 3-Pin Powered Pump
PrimoChill Anti-Kink Coils - 1/2 OD" Tubing - UV Blue
Feser Aqua Non Conductive Ultra Pure Water
IandH Silver KillCoils
Feser Base Corrosion Blocker
here's the hardware
the stock heatsink modded to allow the water block to fit...
water block mounted
water block with the stock heatsink floating, testing for fit. I still need to smooth out the fins with my dremel, and check the clearance of the plastic shroud and the water block. I'm probably going to have to cut a portion of it out.
http://img.techpowerup.org/100825/IMG00103-20100824-2030.jpg
The Obsidian 800D
Last edited by a moderator: