• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How to maintain your fans, Also how to succesfully perform fan surgery

Sticky this?


  • Total voters
    42

de.das.dude

Pro Indian Modder
Joined
Jun 13, 2010
Messages
8,755 (1.74/day)
Location
Stuck in a PC. halp.
System Name Monke | Work Thinkpad| Old Monke
Processor Ryzen 5600X | Ryzen 5500U | FX8320
Motherboard ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4
Cooling 240mm Rad | Not needed | hyper 212 EVO
Memory 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600
Video Card(s) Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB
Storage Samsung 980 nvme (Primary) | some samsung SSD
Display(s) Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L
Case Ant Esports Tempered case | Thinkpad | Antec
Audio Device(s) Logitech Z333 | Jabra corpo stuff
Power Supply Corsair RM750e | not needed | Corsair GS 600
Mouse Logitech G400 | nipple
Keyboard Logitech G213 | stock kb is awesome | Logitech K230
VR HMD ;_;
Software Windows 10 Professional x3
Benchmark Scores There are no marks on my bench
Its common for fans to grow old and start making screeching or scratchy noises.
Their RPMs drop and so does their performance.

Its common for fans to grow old and start making screeching or scratchy noises.
Their RPMs drop and so does their performance.


So how do you fix this?

Simple.

I have used the stock AMD fan which is a dual ball bearing one.
specifications are.
max rpm = 6500rpm
voltage = 12V
Current = 0.45A
4 wire PWM fan


The patients:


First step is to remove the sticker that sits on top. In the picture below, you can see that i am peeling it off.


sometimes beneath the sticker, there is another black cap like thingy.
it can be removed easily.
its shown here


Notice the C-Clip that sits in the middle. your next task is to remove it.
note: there may be more than one washer there.


see the black dirt around the shaft? thats bad.


In this next pic you can see the clip has been removed.


The washer is a key component in dissecting the fan. It is white, but the grease-dirt concoction makes it yellow/black

You need to take the washer out somehow.
The washer is generally a C shaped ring with a cut on one side. this cut is for easy fitting of the washer onto the axle. Even if some fans have this washer, there are other round washers below this C shaped one be careful not to loose those. Loosing them will make you fan wobbly and/or unstable.

The best way to remove this clip is to use a pen point to press on the side opposite to the cut, and then use a pair of tweezers to lift from the side of the cut.

after a while you should be able to do this with your fingernails, like me.

If you are doing maintenance, stop messing with the fan at this step.
Just add two drops of lube, or use petroleum jelly or motor grease. no WD-40
Snap the C-clip back on and the sticker. thats done. If the sticker has lost its adhesive properties, just use a masking tape to cover up.
Try it now. If the screeching sound persists, continue...



now, i have removed the clip, and separated the blades. you can separate the blades by simply pulling them away from the frame. Be careful as to not drop them.

if the fan blades drop, they can break.

in case of ball bearing fans you need to tap the shaft out.



You can see the coils in this pic with the frame turned upside down. Notice the areas of maximum dirt accumulation

dont mess with anything sharp, the coils are really delicate.
I advise cleaning with a 5-10% ethanol solution or kerosene.
You may use a can of deodorant as well, its fast and quick. and makes your fan smell manly (if you use manly scents :p)


The blades portion of the fan, after cleaning:



For those who still have the screetching or scratchy noise after greasing, on dis-assembling the fan completely, clean the axle with ethanol(or spirit or alcohol). clean the hole with ethanol too.
Then using your fingers put some grease on the shaft. No excess please. As excess grease = more dirt.

Also put a dab of grease in the hole in a way such that the shaft will push the grease through the hole during assembly.

The above step would result in a small amount of grease at the top of the shaft like this


Dont have to clean it. Smear it around.

Then put everything back again, and put on the cap. Dont forget the tiny bits!!
here is a hint of how to put the clip back in:






Hope this helped ya fix em ol fans!
cheers
:toast:
do thank / rape me!

All support is appreciated!
queries? post 'em!


here are some more pics










(c) de.das.dude
 
Last edited:

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,851 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
Cool i like to say never use WD40 as it's a de greaser but is harder to remove after and what you said to use is about the best.

I find sewing machine oil best as it's thinner and will allow the fan to spin more easily. Which is all so good for CD\DVD\ players too

When moving that C shaped washer i place my finger over the hole so it don't go flying across the room lol. And i use a tiny sized screw driver those you see in small boxes.
 
T

TechnicalFreak

Guest
I use Malossi lubricant, made for the CVT on scooters, but works like magic for fans..
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
3 in 1 Oil is what I use, works wonders and 9 times out of 10 I don't have to remove the washer.
 

Bo$$

Lab Extraordinaire
Joined
May 7, 2009
Messages
5,656 (1.04/day)
Location
London, UK
System Name Desktop | Server
Processor Intel i7 2700k @ 4.6GHZ | AMD 5350 @ 2500MHZ
Motherboard Asus P7Z77-V Pro | Asus AM1I-A
Cooling Corsair H60v2 | Stock Air
Memory Crucial Ballistix 2x8GB CL8 1600MHZ | Corsair Vengence 2x4GB CL9 1600MHZ
Video Card(s) EVGA GTX 1060 6GB | PNY GTX 750Ti
Storage Samsung 840 EVO 250GB + 4TB WD Red | 2x Seagate Barracuda 2TB
Display(s) Samsung S27D390H + Asus VE276Q | Headless
Case Fractal Design R5 | CM Elite 110
Audio Device(s) Asus Xonar D1 w/Otone Stilo 5.1 and Creative Fatal1ty headset
Power Supply EVGA Supernova 850 G2| Corsair CX430M
Mouse Razer Imperator 2012
Keyboard Corsair K90
Software Windows 7 SP1 X64 | Ubuntu 16.04LTS
motor oil is a wonder, my most of my fans tend to start grinding and can't be fixed
 

PVTCaboose1337

Graphical Hacker
Joined
Feb 1, 2006
Messages
9,501 (1.43/day)
Location
Texas
System Name Whim
Processor Intel Core i5 2500k @ 4.4ghz
Motherboard Asus P8Z77-V LX
Cooling Cooler Master Hyper 212+
Memory 2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card(s) Gigabyte GTX 670 2gb
Storage Samsung 840 Pro 256gb, WD 2TB Black
Display(s) Shimian QH270 (1440p), Asus VE228 (1080p)
Case Cooler Master 430 Elite
Audio Device(s) Onboard > PA2V2 Amp > Senn 595's
Power Supply Corsair 750w
Software Windows 8.1 (Tweaked)
The best lubricant is the same that I use on my firearms. It is "Teflon Coating Lubricant, Medium" according the bottle it comes from. It is like oil and teflon goodness mixed together. I also recommend graphite lubricant. It is like a powder, but works well, but it is messy.

EDIT: FYI, if you don't have OPERATOR OPERATOR friends, just get this: http://www.webbikeworld.com/t2/motorcycle-chain-lube/dupont-teflon-chain-lube.htm
 

Easy Rhino

Linux Advocate
Staff member
Joined
Nov 13, 2006
Messages
15,436 (2.43/day)
Location
Mid-Atlantic
System Name Desktop
Processor i5 13600KF
Motherboard AsRock B760M Steel Legend Wifi
Cooling Noctua NH-U9S
Memory 4x 16 Gb Gskill S5 DDR5 @6000
Video Card(s) Gigabyte Gaming OC 6750 XT 12GB
Storage WD_BLACK 4TB SN850x
Display(s) Gigabye M32U
Case Corsair Carbide 400C
Audio Device(s) On Board
Power Supply EVGA Supernova 650 P2
Mouse MX Master 3s
Keyboard Logitech G915 Wireless Clicky
Software The Matrix
i have had a lot of expensive case fans go bad on me. i will try this out this weekend.
 
Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10
I use Vaseline, works fine.

Even better is Lubrimax.
 

Easy Rhino

Linux Advocate
Staff member
Joined
Nov 13, 2006
Messages
15,436 (2.43/day)
Location
Mid-Atlantic
System Name Desktop
Processor i5 13600KF
Motherboard AsRock B760M Steel Legend Wifi
Cooling Noctua NH-U9S
Memory 4x 16 Gb Gskill S5 DDR5 @6000
Video Card(s) Gigabyte Gaming OC 6750 XT 12GB
Storage WD_BLACK 4TB SN850x
Display(s) Gigabye M32U
Case Corsair Carbide 400C
Audio Device(s) On Board
Power Supply EVGA Supernova 650 P2
Mouse MX Master 3s
Keyboard Logitech G915 Wireless Clicky
Software The Matrix
Joined
Mar 9, 2008
Messages
1,177 (0.20/day)
System Name KOV
Processor AMD 5900x
Motherboard Asus Crosshair Hero VIII
Cooling H100i Cappellix White
Memory Corsair 3600kHz 32GB
Video Card(s) RX 7900XT
Storage Samsung 970 evo 500gb, Corsair 500gb ssd, 500GB 840 pro & 1TB samsung 980pro. M2.SSD 960 evo 250GB
Display(s) ASUS TUF Gaming VG32VQ1B 165mhz, Dell S2721DGFA 27 Inch QHD 165mhz
Case Corsair 680x
Audio Device(s) ON Board and Hyper X cloud flight wireless headset and Bose speakers
Power Supply AX1200i Corsair
Mouse Logitech G502x plus lightspeed
Keyboard Logitech G915 TKL lightspeed and G13 gamepad
Software windows 11
Brilliant and thanks a lot for this
 

wolf

Performance Enthusiast
Joined
May 7, 2007
Messages
7,726 (1.25/day)
System Name MightyX
Processor Ryzen 5800X3D
Motherboard Gigabyte X570 I Aorus Pro WiFi
Cooling Scythe Fuma 2
Memory 32GB DDR4 3600 CL16
Video Card(s) Asus TUF RTX3080 Deshrouded
Storage WD Black SN850X 2TB
Display(s) LG 42C2 4K OLED
Case Coolermaster NR200P
Audio Device(s) LG SN5Y / Focal Clear
Power Supply Corsair SF750 Platinum
Mouse Corsair Dark Core RBG Pro SE
Keyboard Glorious GMMK Compact w/pudding
VR HMD Meta Quest 3
Software case populated with Artic P12's
Benchmark Scores 4k120 OLED Gsync bliss
I've always used sewing machine oil personally, never tried..... Lubrimax.
 

Bo$$

Lab Extraordinaire
Joined
May 7, 2009
Messages
5,656 (1.04/day)
Location
London, UK
System Name Desktop | Server
Processor Intel i7 2700k @ 4.6GHZ | AMD 5350 @ 2500MHZ
Motherboard Asus P7Z77-V Pro | Asus AM1I-A
Cooling Corsair H60v2 | Stock Air
Memory Crucial Ballistix 2x8GB CL8 1600MHZ | Corsair Vengence 2x4GB CL9 1600MHZ
Video Card(s) EVGA GTX 1060 6GB | PNY GTX 750Ti
Storage Samsung 840 EVO 250GB + 4TB WD Red | 2x Seagate Barracuda 2TB
Display(s) Samsung S27D390H + Asus VE276Q | Headless
Case Fractal Design R5 | CM Elite 110
Audio Device(s) Asus Xonar D1 w/Otone Stilo 5.1 and Creative Fatal1ty headset
Power Supply EVGA Supernova 850 G2| Corsair CX430M
Mouse Razer Imperator 2012
Keyboard Corsair K90
Software Windows 7 SP1 X64 | Ubuntu 16.04LTS
Joined
Jan 24, 2010
Messages
3,603 (0.70/day)
Location
Oregon, USA
System Name GLaDOS
Processor AMD FX-9590 X8 4.7GHz
Motherboard ASUS Sabertooth 990FX
Cooling Corsair H80i v2
Memory Corsair Vengeance 24GB (2x8GB, 2x4GB) DDR3 1600 MHz
Video Card(s) ASUS ROG-STRIX-RX580-O8G-GAMINGOC
Storage WD Blue 3D NAND 1TB Internal PC SSD
Display(s) 2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case Corsair iCUE 220T RGB Airflow
Audio Device(s) Onboard - Corsair Void Pro Wireless
Power Supply Corsair 850HXi 850W
Mouse Corsair Sabre RGB
Keyboard Corsair K70 LUX RGB
Software Microsoft Windows 10 Pro 64 Bit
I use white lithium grease on my fans. Works pretty damn well.
 

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,851 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
The best lubricant is the same that I use on my firearms. It is "Teflon Coating Lubricant, Medium" according the bottle it comes from. It is like oil and teflon goodness mixed together. I also recommend graphite lubricant. It is like a powder, but works well, but it is messy.

EDIT: FYI, if you don't have OPERATOR OPERATOR friends, just get this: http://www.webbikeworld.com/t2/motorcycle-chain-lube/dupont-teflon-chain-lube.htm

Sounds kinda cool. I use Super Lube but the one i have is too thick for fans although they do a spray too.

http://www.super-lube.com/
 
Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10

Have a minty sweet? :p

thats the same crap as WD40 right?

if so it will wear them out faster, use an oil best and cheapest

No, WD40 does make plastic/nylon bearings wear out faster because it corrodes them.

Both vaseline and that product are suggested for example for the bearing in automotive gear levers - in many case it's made of nylon and if you use normal oil lubricant it will get ruined.
 

PVTCaboose1337

Graphical Hacker
Joined
Feb 1, 2006
Messages
9,501 (1.43/day)
Location
Texas
System Name Whim
Processor Intel Core i5 2500k @ 4.4ghz
Motherboard Asus P8Z77-V LX
Cooling Cooler Master Hyper 212+
Memory 2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card(s) Gigabyte GTX 670 2gb
Storage Samsung 840 Pro 256gb, WD 2TB Black
Display(s) Shimian QH270 (1440p), Asus VE228 (1080p)
Case Cooler Master 430 Elite
Audio Device(s) Onboard > PA2V2 Amp > Senn 595's
Power Supply Corsair 750w
Software Windows 8.1 (Tweaked)
Have a minty sweet? :p



No, WD40 does make plastic/nylon bearings wear out faster because it corrodes them.

Both vaseline and that product are suggested for example for the bearing in automotive gear levers - in many case it's made of nylon and if you use normal oil lubricant it will get ruined.

I have never tried Vaseline, but I would worry that it would be too thick. I guess not.
 
Joined
Sep 7, 2010
Messages
483 (0.10/day)
Location
baghdad/iraq
Processor intel i5 2500k,atom280@1930mhz
Motherboard msi h61
Cooling i have cooler master V8 but now im on stock :P
Memory team group elite 2x2 1600 @1333 7 7 7 20
Video Card(s) sapphere 5850 toxic@900/1250
Storage WD 1TB green 5400 32mb ,WD 250gb 7200/8mb
Display(s) HP 22" 1680x1050 hdmi
Case asus vento
Audio Device(s) creative XFi fatality+creative gigaworksG500 5.1
Power Supply cooler master gx 750
Software win7,64bit
Joined
Apr 16, 2010
Messages
3,455 (0.68/day)
Location
Portugal
System Name LenovoⓇ ThinkPad™ T430
Processor IntelⓇ Core™ i5-3210M processor (2 cores, 2.50GHz, 3MB cache), Intel Turbo Boost™ 2.0 (3.10GHz), HT™
Motherboard Lenovo 2344 (Mobile Intel QM77 Express Chipset)
Cooling Single-pipe heatsink + Delta fan
Memory 2x 8GB KingstonⓇ HyperX™ Impact 2133MHz DDR3L SO-DIMM
Video Card(s) Intel HD Graphics™ 4000 (GPU clk: 1100MHz, vRAM clk: 1066MHz)
Storage SamsungⓇ 860 EVO mSATA (250GB) + 850 EVO (500GB) SATA
Display(s) 14.0" (355mm) HD (1366x768) color, anti-glare, LED backlight, 200 nits, 16:9 aspect ratio, 300:1 co
Case ThinkPad Roll Cage (one-piece magnesium frame)
Audio Device(s) HD Audio, RealtekⓇ ALC3202 codec, DolbyⓇ Advanced Audio™ v2 / stereo speakers, 1W x 2
Power Supply ThinkPad 65W AC Adapter + ThinkPad Battery 70++ (9-cell)
Mouse TrackPointⓇ pointing device + UltraNav™, wide touchpad below keyboard + ThinkLight™
Keyboard 6-row, 84-key, ThinkVantage button, spill-resistant, multimedia Fn keys, LED backlight (PT Layout)
Software MicrosoftⓇ WindowsⓇ 10 x86-64 (22H2)
It's a good guide, I might try it out with some "patients" here.:laugh:
Call me lazy, but when (cheap) ball bearing and/or sleeve bearing fans broke down on me or start degrading performance, I just go buy a new fluid bearing fan. Less hassle, more performance and it will last longer. I can also go nuts and buy a maglev fan (expensive!, not available here) and never have to worry about that again.
 

theonedub

habe fidem
Joined
Apr 30, 2009
Messages
8,025 (1.47/day)
Location
Northern CA, USA
System Name Erakith || AsRock NUCS
Processor AMD ThreadRipper 2990WX ES (32c/64t 3.5ghz@1.02v) || Intel i7 1360P Raptor Lake-P
Motherboard MSI X399 MEG Creation || AsRock OE
Cooling EK Supremacy TR4 Full Nickel, D5 w/ EK Top, 2X EK-CoolStream XTX 360 & Photon 270 Res || OE
Memory 32GB (4x8GB) Corsair Vengeance PRO RGB DDR4 3000|| 2x16GB Corsair DDR4
Video Card(s) Vega 64 EK FC|| Intel Iris Xe
Storage 250gb WD Black NVMe & (2) 2TB Intel 660p NVMe || 2TB Corsair MP600 Pro
Display(s) 34" Dell Ultrasharp U3415W
Case CaseLabs Merlin SM8 || Aluminum Unibody
Power Supply Corsair HX1000
Mouse Corsair Harpoon Wireless RGB
Keyboard Corsair Strafe RGB w/ Cherry MX Silent
Software Windows 10 Pro x64 || WIndows 11 Pro x64
Benchmark Scores WCG & F@H Only
I use wheel bearing grease (lithium based). Brought my YL L12 back to life :)
 
Joined
May 25, 2006
Messages
167 (0.03/day)
System Name BlackLightening
Processor AMD Ryzen 9 7900X
Motherboard Gigabyte B650 Aorus Elite AX v2.0
Cooling Corsair H170i Pro Push/ Pull with 6 corsair SP 140's
Memory Corsair Vengeance Black RGB 32GB DDR5 6000MHz (2 x 16GB)
Video Card(s) EVGA GeForce RTX 3080 Ti FTW3 Ultra
Storage 1 - Samsung 980 Pro 1 TB PCIe 4.0 NVMe M.2 SSD, 2 -WD Black SN850X 2 TB PCIe 4.0 NVMe M.2 SSD,s
Display(s) MSI Optix MAG321CQR Curved
Case Corsair iCue 7000X RGB Full Tower Tempered Glass
Audio Device(s) Creative SoundBlaster X AE-5+ Pci-e (Logitech Z5300e speakers)
Power Supply Corsair HX 1000i
Mouse Corsair M65 Elite
Keyboard Corsair K68
Software Windows 11 Professional 64 bit
I do it the easy way, Throw the old one away and buy a new one. :nutkick::D
 

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,851 (3.08/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
I do it the easy way, Throw the old one away and buy a new one. :nutkick::D

Easy way ? :slap: , You could have the fan all sorted within a hour and for me at least would take 5 days to get a good new one which would cost any thing from $14 + postage and that to me is not the easy way.
 
Joined
Apr 4, 2008
Messages
4,686 (0.80/day)
System Name Obelisc
Processor i7 3770k @ 4.8 GHz
Motherboard Asus P8Z77-V
Cooling H110
Memory 16GB(4x4) @ 2400 MHz 9-11-11-31
Video Card(s) GTX 780 Ti
Storage 850 EVO 1TB, 2x 5TB Toshiba
Case T81
Audio Device(s) X-Fi Titanium HD
Power Supply EVGA 850 T2 80+ TITANIUM
Software Win10 64bit
I'm surprised any of this is needed. I just buy nice fans and they last me forever, only exception being those scythe slipstream fans. Both I got ceased and the sticker bulged out and they leaked grease, but I wouldn't consider those decent fans anyways.
 
Joined
Sep 7, 2010
Messages
483 (0.10/day)
Location
baghdad/iraq
Processor intel i5 2500k,atom280@1930mhz
Motherboard msi h61
Cooling i have cooler master V8 but now im on stock :P
Memory team group elite 2x2 1600 @1333 7 7 7 20
Video Card(s) sapphere 5850 toxic@900/1250
Storage WD 1TB green 5400 32mb ,WD 250gb 7200/8mb
Display(s) HP 22" 1680x1050 hdmi
Case asus vento
Audio Device(s) creative XFi fatality+creative gigaworksG500 5.1
Power Supply cooler master gx 750
Software win7,64bit
It's a good guide, I might try it out with some "patients" here.:laugh:
Call me lazy, but when (cheap) ball bearing and/or sleeve bearing fans broke down on me or start degrading performance, I just go buy a new fluid bearing fan. Less hassle, more performance and it will last longer. I can also go nuts and buy a maglev fan (expensive!, not available here) and never have to worry about that again.

nothing can stop in front of dust :shadedshu here in great iraq nothing can survive dust so cleaning and greasing is the way;)
 
Joined
Aug 11, 2009
Messages
6,823 (1.28/day)
Location
Viking Land
System Name Ivy Biatch
Processor i5 3570K
Motherboard ASSRockzz z77TOTHEEXTREME!!!!
Cooling bleh
Memory 2x4gb crucial 1866
Video Card(s) HD7770, yes it does BF3
Storage 120gb Vertex
Display(s) 226BW
Case whats that, oh my table
Audio Device(s) stock onboard thing
Power Supply HX850W
Software 7
awesome guide, thanks !!!
 
Joined
Mar 18, 2008
Messages
5,398 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
I use grease from a can with a long nozzle, works for me. Not all fans have an easy access point like the one you are showing, gotta squirt it from behind to fix this problem.

Wish my m8s would listen as both have thermaltake fans that are dieing after only 6months of use, my god there bad fans. zalman FTW. Second choice Coolermaster.
 
Top