error_f0rce
New Member
- Joined
- Jun 6, 2006
- Messages
- 938 (0.14/day)
- Location
- Wisconsin, USA
Processor | Intel Core i7-930 (D0) @ 4.0GHz (1.28v) |
---|---|
Motherboard | GIGABYTE GA-X58A-UD3R |
Cooling | CoolIT ECO-R120 Advanced Liquid Cooling w/ x2 Scythe ULTRA-KAZE 3000rpm | Scythe Master controller |
Memory | Mushkin Enhanced Redline - 6GB DDR3 @ 1910MHz 8-10-8-29 |
Video Card(s) | MSI N460GTX Twin Frozr II SOC GeForce GTX 460 768MB 192-bit GDDR5 |
Storage | RAID-0 w/ 2x OCZ Agility 2 SSD 90GB SATA II 3.5" (r4.6Gb/s w4.2Gb/s) |
Display(s) | ASUS VW266H - 26" LCD |
Case | COOLER MASTER Storm Scout | x2 120mm Scythe ULTRA-KAZE | 140mm Scythe Slipstream KAZE Maru2 |
Power Supply | Thermaltake Black Widow TR2 RX - 850w |
I just put together this new rig and my OCZ Agility 2 is running at a fraction of what is should be. I've tried enabling AHCI (Windows 7 was originally installed in IDE mode) and enabling TRIM, but with no serious improvement. Here's AS SSD benchmark with Marvel 9128 and ICH10R (tried both):
AHCI with Marvell 9128
AHCI with ICH10R
Here is the review by our own fearless leader: http://www.techpowerup.com/reviews/OCZ/Agility_2_120_GB/5.html
Looks like my speeds should be significantly higher. Alignment looks good from AS SSD and I've also used Paragon Alignment Tool to varify this. I'm currently running the OS from this drive if that makes a difference. I have not tried the sanitary erase prog mentioned in the other thread yet.
What gives?:shadedshu
AHCI with Marvell 9128
AHCI with ICH10R
Here is the review by our own fearless leader: http://www.techpowerup.com/reviews/OCZ/Agility_2_120_GB/5.html
Looks like my speeds should be significantly higher. Alignment looks good from AS SSD and I've also used Paragon Alignment Tool to varify this. I'm currently running the OS from this drive if that makes a difference. I have not tried the sanitary erase prog mentioned in the other thread yet.
What gives?:shadedshu