x800professor
New Member
- Joined
- Jun 16, 2006
- Messages
- 894 (0.14/day)
Processor | E6600 @ 3.5GHz |
---|---|
Motherboard | EVGA 680i |
Cooling | Thermaltake Big Typhoon with high CFM LED fan + 25cm case fan |
Memory | 2GB Corsair Dominator DDR2 1066 C5 @ 1130 5-5-5-15 |
Video Card(s) | EVGA 8800 GTS 655/909 |
Storage | 400GB Seagate Barracuda |
Display(s) | 20.1" SCEPTRE X20WC-Gamer |
Case | Thermaltake Armor with 25cm fan |
Audio Device(s) | On board for now |
Power Supply | FSP Group (Fortron Source) FX700-GLN |
Software | Windows XP Professional |
Ok, there is a gigantic thread going on with this that has been extremely helpful. However, you have to search the entire thread to actually figure out what to do. So, I'm going to list step by step instructions right here for anyone who needs them.
Step 1: Download the attachment
Step 2: Follow the instructions about checking your fuses
Step 3: Dump your bios with ATItool (Settings -> Miscellaneous -> dump bios)
Step 4: Open your current BIOS with RaBit 1.7 or later and go to "Logging" section scroll down and search for:
Desc: RADEON X800 GTO
Info: 11X-CC6600SA-004, CC6600SA.004, 01/20/05,14:19:32
Step 5: If all checks out, simply burn the iso, boot from it, and flash!
Ultra special thanks to dolf for coming up with all this stuff and thanks to everyone else in the forum. This should simplify the process a bit!
Step 1: Download the attachment
Step 2: Follow the instructions about checking your fuses
Step 3: Dump your bios with ATItool (Settings -> Miscellaneous -> dump bios)
Step 4: Open your current BIOS with RaBit 1.7 or later and go to "Logging" section scroll down and search for:
Desc: RADEON X800 GTO
Info: 11X-CC6600SA-004, CC6600SA.004, 01/20/05,14:19:32
Step 5: If all checks out, simply burn the iso, boot from it, and flash!
Ultra special thanks to dolf for coming up with all this stuff and thanks to everyone else in the forum. This should simplify the process a bit!
Attachments
Last edited: