Serious Find Max Core and Mem Problem!

dicksonpk · Jul 6, 2006

I am using HIS X1800GTO IceQ3 and ATITool 0.25 Beta 14
I want to overclock it
so I press Find Max Core(Mem Speed is at default)
I know that if the core is unstable at that speed or artifacts are found
the core speed will slow down until it becomes stable
But my ATITool will not slow down the core speed even artifacts are found
it will continue overclock until the system is crashed
I have uninstalled the old ATITool and download a new one from this website

http://www.techpowerup.com/downloads/259

But the problem still remains unchanged even on the new ATITool
And the same problem also happened on Find Max Mem

Who can help me solve the problem???PLX>_<"

POGE · Jul 6, 2006

Dont triple post... :|

dicksonpk · Jul 13, 2006

Please help me>_<

warup89 · Jul 13, 2006

It always did the same for me; the only thing i do is to stop the OC when i start seeing artifacts, and lower the core by 5 hertz, then i raise the gpu Voltage a bit (.20V)and start the max thingy again. Always remember to run ur fans at 85% when OCing (and always keep it like that afterwards)

dicksonpk · Jul 13, 2006

warup89 said:
It always did the same for me; the only thing i do is to stop the OC when i start seeing artifacts, and lower the core by 5 hertz, then i raise the gpu Voltage a bit (.20V)and start the max thingy again. Always remember to run ur fans at 85% when OCing (and always keep it like that afterwards)

THANKS~

But the whole process,Find Max Core, is auto.
Do your ATITool lower the core automatically after detecting any artifacts??
What graphic card are you using??

infrared · Jul 13, 2006

what version of atitool is it? Some of the 0.25 beta versions don't stop raising the clock speeds.

Try downloading either 0.24 or 0.25 beta 9/10 They all work correctly for x800/x850 series cards

http://www.techpowerup.com/downloads/Tweaking/ATITool

that should solve the problem

dicksonpk · Jul 13, 2006

infrared said:
what version of atitool is it? Some of the 0.25 beta versions don't stop raising the clock speeds.

Try downloading either 0.24 or 0.25 beta 9/10 They all work correctly for x800/x850 series cards

http://www.techpowerup.com/downloads/Tweaking/ATITool

that should solve the problem

Thanks you for your help^^

I am using 0.25 Beta14 which is the newest and support X1800 series.
And also I am using X1800GTO but not X800/X852 series.

Urlyin · Jul 13, 2006

try reading some of this review with some tips .. here

dicksonpk · Jul 13, 2006

At this point you should be familiar with stopping the correct services, change voltage to 3D clocks and change the clocks themselves. Often, but not always the 'Find Max' will lock the system up, this is not a show stopper and can be to your benefit. Now you know at which speed the card is no longer stable. As shown below when we restart ATITool it tells us at what speed the tool crashed.

I don't know what exactly it means.

warup89 · Jul 13, 2006

i have an x1800xt, but i tried that same version of atitool on and x1800xl too and it doesnt lower the clock when artifacting.

dicksonpk · Jul 13, 2006

warup89 said:
i have an x1800xt, but i tried that same version of atitool on and x1800xl too and it doesnt lower the clock when artifacting.

Does your ATItool show any temperatures and voltage control??

warup89 · Jul 13, 2006

yeah 1 for GPU and 2 for mem

pt · Jul 13, 2006

My powercolor x1800GTO don't show anything in Atitool, Voltage, fan control and temps. If you need to check the Temps, voltages and fan speed use Rivatuner

warup89 · Jul 13, 2006

thats really weird, because i used ATItool on a x1800xl (closest cousing to the GTO) and it showied me everything.

infrared · Jul 13, 2006

that is weird, i've never come across an x1k series card that doesn't show temperature in atitool. Yeah, see if rivatuna works.

btw, warup, getting my wages this saturday, i'll go streight to the bank on monday and i should have enough for the x850cf

thanks for being patient.

warup89 · Jul 13, 2006

yeah if rivatuner works, then stick with it :cool:

.

-and alright man, i have the card ready for you

pt · Jul 13, 2006

Rivatuner works fine and shows everything but can't change voltages (not that i want)

dicksonpk · Jul 14, 2006

pt said:
My powercolor x1800GTO don't show anything in Atitool, Voltage, fan control and temps. If you need to check the Temps, voltages and fan speed use Rivatuner

Me too!!
I can't find any voltage control,fan control and temperature in my ATITool!!!
What is the problem??

pt · Jul 14, 2006

perhaps in the next version of ATITOOL, meanwhile use Rivatuner

Processor	Turion 64 ML-34 1.8Ghz
Motherboard	Compaq Laptop Mobo
Cooling	Stock Compaq Laptop Fan
Memory	1x 256 DDR333
Video Card(s)	Radeon 200m
Storage	40GB 5200RPM HP
Display(s)	Stock Laptop LCD
Case	Laptop Case
Audio Device(s)	Onboard Realtek
Power Supply	Stock Laptop Powerbrick
Software	Windows XP Pro

System Name	Iam-a-computah
Processor	i9 9900k @5 Ghz
Motherboard	Gigabyte Auros z390x
Cooling	Custom water loop, x2 280 radiators
Memory	16gb Corsair Dominator
Video Card(s)	MSI 1080 TI FE 11gb WC
Storage	SSD: 256gb Samsung 840pro & HHD: WD black 2T
Display(s)	LG 34" UW screen
Case	EVGA DG-86
Audio Device(s)	Creative x-FI
Power Supply	EVGA super NOVA 1300wtt
Keyboard	G710
Software	W 10

System Name	Box of Distraction
Processor	Ryzen 7 1800X
Motherboard	Crosshair VI Hero
Cooling	Custom watercooling
Memory	G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s)	EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage	Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s)	Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case	Phanteks Enthoo Pro M
Audio Device(s)	Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply	EVGA Supernova 750W G3
Mouse	Logitech G602
Keyboard	Cherry MX Board 6.0 (mx red switches)
Software	Win 10 & Linux Mint
Benchmark Scores	https://hwbot.org/user/infrared

System Name	Iam-a-computah
Processor	i9 9900k @5 Ghz
Motherboard	Gigabyte Auros z390x
Cooling	Custom water loop, x2 280 radiators
Memory	16gb Corsair Dominator
Video Card(s)	MSI 1080 TI FE 11gb WC
Storage	SSD: 256gb Samsung 840pro & HHD: WD black 2T
Display(s)	LG 34" UW screen
Case	EVGA DG-86
Audio Device(s)	Creative x-FI
Power Supply	EVGA super NOVA 1300wtt
Keyboard	G710
Software	W 10

System Name	Iam-a-computah
Processor	i9 9900k @5 Ghz
Motherboard	Gigabyte Auros z390x
Cooling	Custom water loop, x2 280 radiators
Memory	16gb Corsair Dominator
Video Card(s)	MSI 1080 TI FE 11gb WC
Storage	SSD: 256gb Samsung 840pro & HHD: WD black 2T
Display(s)	LG 34" UW screen
Case	EVGA DG-86
Audio Device(s)	Creative x-FI
Power Supply	EVGA super NOVA 1300wtt
Keyboard	G710
Software	W 10

Serious Find Max Core and Mem Problem!

dicksonpk

New Member

POGE

New Member

dicksonpk

New Member

warup89

dicksonpk

New Member

infrared

dicksonpk

New Member

Urlyin

I still do pencil mods

dicksonpk

New Member

warup89

dicksonpk

New Member

warup89

pt

not a suicide-bomber

warup89

infrared

warup89

pt

not a suicide-bomber

dicksonpk

New Member

pt

not a suicide-bomber

Processor	AMD Turion 64 X2 Mobile TL-60 (Trinidad)
Motherboard	ASUS F3Ka (ATI RS690M)
Cooling	stock
Memory	Nanya 2x1GB ddr2 667@5-5-5-15-2T
Video Card(s)	ATI Mobility Radeon HD2600 512MB DDR2@ 580mhz/486mhz
Storage	160GB on laptop+250GB external
Display(s)	ASUS 15.4
Case	Asus Laptop F3Ka chassis
Audio Device(s)	on-board
Power Supply	1:30minutes battery
Software	"genui xp", 'cause i hated vista