Canuto
New Member
- Joined
- Jul 8, 2006
- Messages
- 2,153 (0.33/day)
- Location
- Portugal
Processor | Pentium D 930 @3.6Ghz |
---|---|
Motherboard | Biostar 945P-A7A(8.0) |
Cooling | Stock cooling, 1x92mm outtake fan |
Memory | Infineon 2x512Mb DDR2-533 @641Mhz 4-4-4-12 |
Video Card(s) | Powercolor X550 512Mb Hipermemory @510/261Mhz |
Storage | Seagate Barracuda 7200.7 200Gb |
Display(s) | iMax 17" LCD |
Audio Device(s) | Realtek AC'97 ALC655 |
Power Supply | LC Power 550w Silent Giant GREEN POWER |
Software | Windows Vista Ultimate x86 |
Ok i´ve been pushing my Pentium D and i have stability at 3510mhz but when i push it over 3550mhz this BSOD appear talking about physical memory i got the hint and lowered my memory to 400mhz and pushed my cpu to 3600mhz and ran sm2.0 to see if it was stable the BSOD appeared again and i was shocked cause it kept talking about the memory and the memory was under stock with stock voltage and timings.
Before anyone says its the mobo my mobo supports 1066mhz FSB and the highest temp i get on my cpu is 36º running benchmarks.
Can anyone figure out what's going on?
By the way here the technical errors...
*** STOP: 0x0000008E (0xC0000005, 0x8063A7C8, 0xA84E05E4, 0x00000000)
Before anyone says its the mobo my mobo supports 1066mhz FSB and the highest temp i get on my cpu is 36º running benchmarks.
Can anyone figure out what's going on?
By the way here the technical errors...
*** STOP: 0x0000008E (0xC0000005, 0x8063A7C8, 0xA84E05E4, 0x00000000)