EmZvr
New Member
- Joined
- Dec 8, 2006
- Messages
- 8 (0.00/day)
Processor | Allendale E6300 |
---|---|
Motherboard | Gigabyte 965P DS3 |
Cooling | Intel Stock |
Memory | 1GB DDR2 800 SuperT |
Video Card(s) | X1900XT 256 |
Storage | 160GB Sata2 Western Digital |
Display(s) | MAG 786PF |
Case | Thermaltake Soprano VB1000BWS |
Power Supply | Fortron 400PNF |
Software | Windows XP SP2 |
When I make the ram settings in the bios to manual and everything becames to auto and I can change it except one that is not set to auto. It is Refresh to ACT Delay and it is set to 0. A make the RAM latency 4-4-3-8 just like on the label of the RAM (SuperT 1GB 800mhz) But when I tried to turn on the computer the ram test failed and I think this happend because the Refresh to ACT Delay was set to 0. What should I tape in this filed ? CAn someone help...