• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

C2D 6600@3520 / 1.36v

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
I just achieved a stable OC of my CPU running on Air Cooling at 3520mhz ( 1120mhz above stock ) with 1.36v and in quite good temps in comparison with most Air Cooled 6600s ive seen.
Opinions ?

PS : I runned Orthos for 9 hours during the night but didnt snapshot it thus i did a new orthos for 10+ mins to provide a snapshot. Temps were even lower ( -1,2 degrees ) after 9 hours with Orthos..Weird.


C2D6600@ 3520MHZ IDLE




C2D6600@ 3520MHZ FULL LOAD / STRESS

 

ex_reven

New Member
Joined
Sep 4, 2006
Messages
5,217 (0.81/day)
Tis an awesome speed to be sure.
What speeds did tigger get? Im pretty sure he got something similar with an E6300.

If he got that much, theoretically you should be able to go a bit further with some luck

Id love to clock mine that high, but I'd never keep it at that speed in a 24/7 overclock.
Nice work man
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
I can take it to 3600mhz with 45 degrees idle and 60 full load
I even took it to 3800 with 52 idle and 67 load but thats too much.
Either way the 3520 to 3600 overclock aint worth the fuzz if i am to monitor my temps all the time.
 
D

Deleted member 24505

Guest
i got mine to 3.9ghz(560fsb(i think)) max.it does 500fsb(3.5ghz) at 1.325vcore orthos stable.

nice oc tho'.well done :D
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
Id never get it up there...Too afraid of the temps and i aint running on water.
Are you on air ?
Did you try to 3dmark it ? Play a game ?
I found out that at 3.6 with 1.45 i could run orthos for 3+ hours stable but i couldnt 3dmark nor play battlefield 2142.
Weird things.
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
HellasVagabond,
Amazing OC for such a low vCore!

What's the batch number of the CPU?
(see the sticker on retail box: FPO/BATCH#: L6~~~~~~)
 

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro
Id never get it up there...Too afraid of the temps and i aint running on water.
Are you on air ?
Did you try to 3dmark it ? Play a game ?
I found out that at 3.6 with 1.45 i could run orthos for 3+ hours stable but i couldnt 3dmark nor play battlefield 2142.
Weird things.

I found that Orthos isnt using 100% of the CPU :confused: Have you tryed TAT ? And put 100% load on both cores ? The temps are going to be higher and if it doesnt have enough Volts its going to restart but that what happens to me I dont know if it would just frezze for you.
 

Kursah

Super Moderator
Staff member
Joined
Oct 15, 2006
Messages
14,673 (2.29/day)
Location
Missoula, MT, USA
System Name Kursah's Gaming Rig 2018 (2022 Upgrade) - Ryzen+ Edition | Gaming Laptop (Lenovo Legion 5i Pro 2022)
Processor R7 5800X @ Stock | i7 12700H @ Stock
Motherboard Asus ROG Strix X370-F Gaming BIOS 6203| Legion 5i Pro NM-E231
Cooling Noctua NH-U14S Push-Pull + NT-H1 | Stock Cooling
Memory TEAMGROUP T-Force Vulcan Z 32GB (2x16) DDR4 4000 @ 3600 18-20-20-42 1.35v | 32GB DDR5 4800 (2x16)
Video Card(s) Palit GeForce RTX 4070 JetStream 12GB | CPU-based Intel Iris XE + RTX 3070 8GB 150W
Storage 4TB SP UD90 NVME, 960GB SATA SSD, 2TB HDD | 1TB Samsung OEM NVME SSD + 4TB Crucial P3 Plus NVME SSD
Display(s) Acer 28" 4K VG280K x2 | 16" 2560x1600 built-in
Case Corsair 600C - Stock Fans on Low | Stock Metal/Plastic
Audio Device(s) Aune T1 mk1 > AKG K553 Pro + JVC HA-RX 700 (Equalizer APO + PeaceUI) | Bluetooth Earbuds (BX29)
Power Supply EVGA 750G2 Modular + APC Back-UPS Pro 1500 | 300W OEM (heavy use) or Lenovo Legion C135W GAN (light)
Mouse Logitech G502 | Logitech M330
Keyboard HyperX Alloy Core RGB | Built in Keyboard (Lenovo laptop KB FTW)
Software Windows 11 Pro x64 | Windows 11 Home x64
TAT will do what Intel designed it to do, run the CPU the hottest possible, so hot that you cannot replicate it with anything else. My e6300 under Orthos w/Priority 9 only hits ~53c at my OC levels, with TAT my CPU jumps up to ~62c! I'd stick with Orthos because it's closer to what you'll be stressing your CPU at, and even at that you'd have to work pretty hard to load your CPU consistently to match the load Orthos provides.

HellasVagabond, have you manually set your other voltage settings in bios to match your OC?
In 3dMark would it start benching? And if so how long until it failed?

Also good OC man, now if you can tweak it to be stable and cool running you'll have yourself a great system!
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
Since EVEREST claims the CPUs are running at 100% i am willing to believe them.
These guys have been around for years and years.
Besides i wasnt Just running Orthos.

RMCLOCK
CORETEMP
EVEREST
ORTHOS
SNAGIT

So even if Orthos was lets say using 95% i think the rest of the programs would take 5% of the CPU.

As for the 3dmark , i run it 3 times.
One time it started but failed in test Number 2
The other failed in test Number 6
The last time it finished ok but i pressed Print Screen instead of using Snagit and i didnt manage to save a snapshot :(

Either Way ill try TAT :)
 

SilentAces

New Member
Joined
Feb 2, 2007
Messages
121 (0.02/day)
Processor E4300-AllenDale(3.60Ghz oc'ed @1.45v 9x400) 20C idle 28C load
Motherboard Gigabyte GA-965P-S3
Cooling Zalman WaterCooled(CPU, VGA, N. & S. bridge blocks) Koolance VReg.(1800gto) WaterBlock
Memory OCZ 2x512 Platinum DDR2 800 (4--4-12)
Video Card(s) x1800GTO (16pp 709/729) 29C idle 53C load (1.5v GPU 2.433v Memory)
Storage Maxtor 300Gb SATA
Display(s) 19" HP CRT
Case unknown off brand full tower
Audio Device(s) none
Power Supply Antec TruePower 2.0 (480w)
Software XP-Pro
Since EVEREST claims the CPUs are running at 100% i am willing to believe them.
These guys have been around for years and years.
Besides i wasnt Just running Orthos.

RMCLOCK
CORETEMP
EVEREST
ORTHOS
SNAGIT

So even if Orthos was lets say using 95% i think the rest of the programs would take 5% of the CPU.

As for the 3dmark , i run it 3 times.
One time it started but failed in test Number 2
The other failed in test Number 6
The last time it finished ok but i pressed Print Screen instead of using Snagit and i didnt manage to save a snapshot :(

Either Way ill try TAT :)

Ya man...TAT will show your true temps (T_junction)...Everest is a few degrees cooler (about 15c cooler reading the T_case) , and Orthos (tho they say 100%) will not heat up my cores like TAT will....Trust TAT....If memory serves me, you need to stay in the under 75c running TAT full load for that cpu....:rockout:
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
Intel recommends
60 degrees when it comes to General CPU Load ( I get 48 max there ).
70 degress when it comes to Core Temps ( I get 56-57 max there )
110 degress when it comes to Tjunction ( Never tried it )

So in a few words since im good in 2 out of 3 and i have yet to try the third i think im ok.
As for TAT well , when i try to start the stress test it says
"Unable to read the processor frequency"
Is there a newer version other than the 2.05 ?
 

Kursah

Super Moderator
Staff member
Joined
Oct 15, 2006
Messages
14,673 (2.29/day)
Location
Missoula, MT, USA
System Name Kursah's Gaming Rig 2018 (2022 Upgrade) - Ryzen+ Edition | Gaming Laptop (Lenovo Legion 5i Pro 2022)
Processor R7 5800X @ Stock | i7 12700H @ Stock
Motherboard Asus ROG Strix X370-F Gaming BIOS 6203| Legion 5i Pro NM-E231
Cooling Noctua NH-U14S Push-Pull + NT-H1 | Stock Cooling
Memory TEAMGROUP T-Force Vulcan Z 32GB (2x16) DDR4 4000 @ 3600 18-20-20-42 1.35v | 32GB DDR5 4800 (2x16)
Video Card(s) Palit GeForce RTX 4070 JetStream 12GB | CPU-based Intel Iris XE + RTX 3070 8GB 150W
Storage 4TB SP UD90 NVME, 960GB SATA SSD, 2TB HDD | 1TB Samsung OEM NVME SSD + 4TB Crucial P3 Plus NVME SSD
Display(s) Acer 28" 4K VG280K x2 | 16" 2560x1600 built-in
Case Corsair 600C - Stock Fans on Low | Stock Metal/Plastic
Audio Device(s) Aune T1 mk1 > AKG K553 Pro + JVC HA-RX 700 (Equalizer APO + PeaceUI) | Bluetooth Earbuds (BX29)
Power Supply EVGA 750G2 Modular + APC Back-UPS Pro 1500 | 300W OEM (heavy use) or Lenovo Legion C135W GAN (light)
Mouse Logitech G502 | Logitech M330
Keyboard HyperX Alloy Core RGB | Built in Keyboard (Lenovo laptop KB FTW)
Software Windows 11 Pro x64 | Windows 11 Home x64
Hmm...may have a problem with x64 os....
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
there should be a newer version but i cant find it
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
+10mhz up.
Lowered memories from 880 to 800, multiplier x9 :)
 
Joined
Jan 19, 2007
Messages
1,124 (0.18/day)
Location
Chicago
Processor Amd Ryzen 5 5600x kryonaut paste
Motherboard Asus Prime X570 P bios 4021
Cooling Thermaltake Water 3.0 360mm (top mounted for exhaust) 3 Thermaltake 140mm riing rgb case fans
Memory G.Skill Trident Z Neo DDR4 3600 cl16 2x16 dual rank
Video Card(s) Sapphire Nitro+ RX 5700XT OC
Storage Seagate Firecuda 520 500gb NVMe PCIE Gen4 x 4 boot drive XPG S70 Blade Gen 4 x 4 NVMe gaming drive
Display(s) MSI Mag321CQR 32 inch curved 144 hz 1ms
Case Thermaltake View 31
Audio Device(s) Corsair Void USB RGB Dolby Digital 7.1 Headphones
Power Supply Thermaltake Grand RGB 750w
Mouse Corsair Harpoon RGB
Keyboard Corsair K55 RGB
Software Windows 11 Professional
Hellasvagabond. What revision is your dq6?
 

HellasVagabond

New Member
Joined
Jan 19, 2007
Messages
3,376 (0.54/day)
Location
Athens , GREECE
System Name SECONDARY RIG / PRIMARY RIG / THIRD RIG
Processor i920@3.6GHz / i920@4GHz / AMD Phenom II 955
Motherboard Gigabyte EX58-UD4P / Gigabyte EX58-UD7 / ASRock 890GX3
Cooling CoolIT Domino ALC / Thermalright Silver Arrow / Thermalright VenomousX
Memory 12GB DDR3 @ 1800MHZ / 6GB DDR3 @ 2250MHZ / 4GB DDR3 @ 1600MHZ
Video Card(s) XFX ATI RADEON 5970 / GAINWARD NVIDIA GTX 580 / 2xGEFORCE GTX295
Storage 1550GB / 6TB SAS - SSD / 160GB SSD
Display(s) NEC 26WUXi2 / NEC 3090WQXi / SONY 55A2000 (1080P 55inch)
Case COOLER MASTER HAF 932 / COOLER MASTER ATCS 840 / ANTEC DARKFLEET DF85
Audio Device(s) Soundblaster X-Fi Xtreme Music / SoundBlaster X-Fi Fatal1ty Pro / Realtek Onboard
Power Supply CWT 1200W / Enermax Revolution 85+ 1250W / Ikonik Vulcan 1200W
Software Windows 7 x64 / Windows 7 x64 / Windows 7 x64
unfortunantly its revision 1.0
:(
 
Joined
Feb 12, 2006
Messages
2,318 (0.35/day)
System Name MONEY PIT
Processor i7-3770K @ 4800 1.20v batch #3231B415 Delided
Motherboard ASrock Z77 OC Formula w onboard waterblocks
Cooling Apogee HD, MCP655,rad MCR320-XP,Micro Rev2 res
Memory G,skill Trident X F3-2400C10D-16GTX
Video Card(s) EVGA GTX 980 Ti Classified with EK nickel/acetal waterblock installed
Storage 2x120gig Wildfire raid0 2x120gig VERTEX3 raid0
Display(s) 3/ Samsung2343bwx + 65in LG 4K
Case NZXT Phantom White w/red
Audio Device(s) ReCon3d fatal1ty pro, Logitech z906 THX
Power Supply corsair AX860i
Mouse Rat7
Software 64bit ++++ win 10

Casheti

New Member
Joined
May 3, 2006
Messages
4,421 (0.67/day)
It's a shame he got that new ram otherwise he'd still be owning...

And tigger had the legendary Pentium D 930 which was massively OC'ed!

I guess he's lucky with chips...
 
Joined
Jan 19, 2007
Messages
1,124 (0.18/day)
Location
Chicago
Processor Amd Ryzen 5 5600x kryonaut paste
Motherboard Asus Prime X570 P bios 4021
Cooling Thermaltake Water 3.0 360mm (top mounted for exhaust) 3 Thermaltake 140mm riing rgb case fans
Memory G.Skill Trident Z Neo DDR4 3600 cl16 2x16 dual rank
Video Card(s) Sapphire Nitro+ RX 5700XT OC
Storage Seagate Firecuda 520 500gb NVMe PCIE Gen4 x 4 boot drive XPG S70 Blade Gen 4 x 4 NVMe gaming drive
Display(s) MSI Mag321CQR 32 inch curved 144 hz 1ms
Case Thermaltake View 31
Audio Device(s) Corsair Void USB RGB Dolby Digital 7.1 Headphones
Power Supply Thermaltake Grand RGB 750w
Mouse Corsair Harpoon RGB
Keyboard Corsair K55 RGB
Software Windows 11 Professional
unfortunantly its revision 1.0
:(

I have rev 1 also. Did you say earlier your at f9? I thought f9 was for rev 3.3 only.
I tried f9 and thought it was buggy. Maybe I was getting oc instability instead.
 
D

Deleted member 24505

Guest
thanks casheti :D,the 930 was 4.4ghz i think.

i think my success has been down to good mb's,good ram and loads a luck.
 

Kursah

Super Moderator
Staff member
Joined
Oct 15, 2006
Messages
14,673 (2.29/day)
Location
Missoula, MT, USA
System Name Kursah's Gaming Rig 2018 (2022 Upgrade) - Ryzen+ Edition | Gaming Laptop (Lenovo Legion 5i Pro 2022)
Processor R7 5800X @ Stock | i7 12700H @ Stock
Motherboard Asus ROG Strix X370-F Gaming BIOS 6203| Legion 5i Pro NM-E231
Cooling Noctua NH-U14S Push-Pull + NT-H1 | Stock Cooling
Memory TEAMGROUP T-Force Vulcan Z 32GB (2x16) DDR4 4000 @ 3600 18-20-20-42 1.35v | 32GB DDR5 4800 (2x16)
Video Card(s) Palit GeForce RTX 4070 JetStream 12GB | CPU-based Intel Iris XE + RTX 3070 8GB 150W
Storage 4TB SP UD90 NVME, 960GB SATA SSD, 2TB HDD | 1TB Samsung OEM NVME SSD + 4TB Crucial P3 Plus NVME SSD
Display(s) Acer 28" 4K VG280K x2 | 16" 2560x1600 built-in
Case Corsair 600C - Stock Fans on Low | Stock Metal/Plastic
Audio Device(s) Aune T1 mk1 > AKG K553 Pro + JVC HA-RX 700 (Equalizer APO + PeaceUI) | Bluetooth Earbuds (BX29)
Power Supply EVGA 750G2 Modular + APC Back-UPS Pro 1500 | 300W OEM (heavy use) or Lenovo Legion C135W GAN (light)
Mouse Logitech G502 | Logitech M330
Keyboard HyperX Alloy Core RGB | Built in Keyboard (Lenovo laptop KB FTW)
Software Windows 11 Pro x64 | Windows 11 Home x64
And good OC skills...you make it an art dude! It takes a lot of time, patience, thought, open mindedness to create a great OC, the components are only as good as their owner (for the most part)!
 
Top