• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

SLACR / G0 Stepping

Joined
May 7, 2007
Messages
457 (0.07/day)
Location
Irvine, CA
System Name My3yrOldBaby
Processor Intel C2Q Q6600 G0 2.4GHz (3.6 Ghz @ 1.400V)
Motherboard eVGA 790 FTW (Analogue) 132-YW-E179-A1
Cooling Thermalright Ultra-120 eXtreme (Push+Pull: Silverstone 120mm)
Memory 8GB G.Skill DDR3 2x4GB 1866 (running 1600) + 2GB Crucial Ballistix DDR3 1x2GB 1333 (running 1600)
Video Card(s) eVGA 8800GTX 768MB
Storage (2) WD Raptor 150GB SATA [RAID 0], (4) Seagate Barracuda 320GB SATA [RAID 0+1]
Display(s) Acer 20" - AL2017, Acer 22"W - AL2216WBD
Case Thermaltake Armor w/ 25cm Fan & Extra Front iCage
Audio Device(s) OnBoard
Power Supply Silverstone 1000W - ST1000
Software Windows XP Pro x64
I've been looking at getting the Q6600 with the new price cuts, and I'm seeing this difference between "B3/SL9UM" and "G0/SLACR" Stepping. What is this? Can someone explain the concept of "stepping" in the first place, and then why the G0 is better than the B3? - Any articles or anything I could read up on it?

Also, I thought the price on Q6600 was supposed to drop to around $266US... newegg is $319!? Why so high? The lowest I found it for was on mwave or tigerdirect for $289, but guaranteed B3 stepping. I'd like to get the better one, but also want to make sure its worth it.
 
Joined
Aug 12, 2006
Messages
3,278 (0.51/day)
Location
UK-small Village in a Valley Near Newcastle
Processor I9 9900KS @ 5.3Ghz
Motherboard Gagabyte z390 Aorus Ultra
Cooling Nexxxos Nova 1080 + 360 rad
Memory 32Gb Crucial Balliastix RGB 4.4GHz
Video Card(s) MSI Gaming X Trio RTX 3090 (Bios and Shunt Modded) 2.17GHz @ 38C
Storage NVME / SSD RAID arrays
Display(s) 38" LG 38GN950-B, 27" BENQ XL2730Z 144hz 1440p, Samsung 27" 3D 1440p
Case Thermaltake Core series
Power Supply 1.6Kw Silverstone
Mouse Roccat Kone EMP
Keyboard Corsair Viper Mechanical
Software Windows 10 Pro
not sure about intel, since im amd only, but basically, stepping refers to the time during the fabrication that the silicone dies are produced. usually the earlier the production the better the core and thusly better the theoretical overclock. later fabricatios tend to be ok, but nothing special
 
Joined
May 28, 2005
Messages
4,994 (0.72/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
The G0 ones overclock a LOT further ;)
 
Joined
May 7, 2007
Messages
457 (0.07/day)
Location
Irvine, CA
System Name My3yrOldBaby
Processor Intel C2Q Q6600 G0 2.4GHz (3.6 Ghz @ 1.400V)
Motherboard eVGA 790 FTW (Analogue) 132-YW-E179-A1
Cooling Thermalright Ultra-120 eXtreme (Push+Pull: Silverstone 120mm)
Memory 8GB G.Skill DDR3 2x4GB 1866 (running 1600) + 2GB Crucial Ballistix DDR3 1x2GB 1333 (running 1600)
Video Card(s) eVGA 8800GTX 768MB
Storage (2) WD Raptor 150GB SATA [RAID 0], (4) Seagate Barracuda 320GB SATA [RAID 0+1]
Display(s) Acer 20" - AL2017, Acer 22"W - AL2216WBD
Case Thermaltake Armor w/ 25cm Fan & Extra Front iCage
Audio Device(s) OnBoard
Power Supply Silverstone 1000W - ST1000
Software Windows XP Pro x64
infrared said:
The G0 ones overclock a LOT further ;)
ok but why?

And mandelore I'm kinda confused about what you're saying.
 
Joined
May 7, 2007
Messages
457 (0.07/day)
Location
Irvine, CA
System Name My3yrOldBaby
Processor Intel C2Q Q6600 G0 2.4GHz (3.6 Ghz @ 1.400V)
Motherboard eVGA 790 FTW (Analogue) 132-YW-E179-A1
Cooling Thermalright Ultra-120 eXtreme (Push+Pull: Silverstone 120mm)
Memory 8GB G.Skill DDR3 2x4GB 1866 (running 1600) + 2GB Crucial Ballistix DDR3 1x2GB 1333 (running 1600)
Video Card(s) eVGA 8800GTX 768MB
Storage (2) WD Raptor 150GB SATA [RAID 0], (4) Seagate Barracuda 320GB SATA [RAID 0+1]
Display(s) Acer 20" - AL2017, Acer 22"W - AL2216WBD
Case Thermaltake Armor w/ 25cm Fan & Extra Front iCage
Audio Device(s) OnBoard
Power Supply Silverstone 1000W - ST1000
Software Windows XP Pro x64
anyone? anyone?
It seems to be such a big deal to people on newegg in the Reviews, and like "oh G0 is soo much better than B3 blah blah blah"... i figure if I'm lookin to spend that much dinero, should make sure I get what I pay for right?
 

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
G0=less heat
 
Joined
May 28, 2005
Messages
4,994 (0.72/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
Less heat, higher clocks needing less voltage. It's just... better.
 
Joined
Nov 24, 2006
Messages
1,042 (0.16/day)
Location
CT, USA
Processor q6700 @ 3.2ghz
Motherboard Asus p5w DH Deluxe
Cooling Scythe Andy Samurai, 4x80mm silenx, 2x120mm silenx fans
Memory 2x2gb G.Skill 4-4-4-12
Video Card(s) xfx black edition 6870
Storage 250gb seagate sata, 2x250gb seagate perp (raid0)
Display(s) dell 24"
Case Coolermaster atc s4000 sx-1
Audio Device(s) Creative Audigy2 Platinum
Power Supply Antec True Power Trio 650w
Software winXP pro x64
g0 is the newest revision meaning they've ironed out some kinks the earlier version had and it performs better.

I couldn't tell you WHY exactly, but Infrared put it nicely :toast:
 
Joined
May 7, 2007
Messages
457 (0.07/day)
Location
Irvine, CA
System Name My3yrOldBaby
Processor Intel C2Q Q6600 G0 2.4GHz (3.6 Ghz @ 1.400V)
Motherboard eVGA 790 FTW (Analogue) 132-YW-E179-A1
Cooling Thermalright Ultra-120 eXtreme (Push+Pull: Silverstone 120mm)
Memory 8GB G.Skill DDR3 2x4GB 1866 (running 1600) + 2GB Crucial Ballistix DDR3 1x2GB 1333 (running 1600)
Video Card(s) eVGA 8800GTX 768MB
Storage (2) WD Raptor 150GB SATA [RAID 0], (4) Seagate Barracuda 320GB SATA [RAID 0+1]
Display(s) Acer 20" - AL2017, Acer 22"W - AL2216WBD
Case Thermaltake Armor w/ 25cm Fan & Extra Front iCage
Audio Device(s) OnBoard
Power Supply Silverstone 1000W - ST1000
Software Windows XP Pro x64
Alright then I will def go for that. Here's the info I found:

Intel Processor Sites:

SL9UM (B3) - http://processorfinder.intel.com/Details.aspx?ProcFam=0&sSpec=SL9UM&OrdCode=
SLACR (G0) - http://processorfinder.intel.com/Details.aspx?ProcFam=0&sSpec=SLACR&OrdCode=

Other Details (From overclock.net thread on the topic: http://www.overclock.net/intel-cpus/205616-hey-slacr-go-q6600-g0-thread.html)

  • G0 stepping can be recognized by the 06FB CPUID. (The first Q6600 was stepping B3 recognized by 06F7) > The Model number also changes from SL9UM for the B3 to SLACR for the G0 > The SLACR part should be on the box at the end of the PROD CODE# = VIOLA!
  • G0 stepping Q6600, should start shipping as soon as August 6th. <-- However, newegg reviews note that people have already started receiving them from normal orders.
  • It is slated to require 95 watts down from 110 from the current Q6600. This is usually an indicator of higher OC potential!!!
  • It is also slated to have a higher tCase which means it will be rated for higher temps. In this case 11C higher than the B3 stepping tCase of 62.2C giving it a 73.2C rating. (71C on Intel spec sheet)

There's a good price on ensuring you get a G0 (whereas other retailers you may get either), at TankGuys: http://www.tankguys.biz/shopping_cart.php?osCsid=38fca6973929095be95d3aa59b6321f4

Ok that's what I found. Hope it helps anyone having the same lack of understanding about this as I did.
 
Joined
May 28, 2005
Messages
4,994 (0.72/day)
Location
South of England
System Name Box of Distraction
Processor Ryzen 7 1800X
Motherboard Crosshair VI Hero
Cooling Custom watercooling
Memory G.Skill TridentZ 2x8GB @ 3466MHz CL14 1T
Video Card(s) EVGA 1080Ti FE. WC'd & TDP limit increased to 360W.
Storage Samsung 960 Evo 500GB & WD Black 2TB storage drive.
Display(s) Asus ROG Swift PG278QR 27" 1440P 165hz Gsync
Case Phanteks Enthoo Pro M
Audio Device(s) Phillips Fidelio X2 headphones / basic Bose speakers
Power Supply EVGA Supernova 750W G3
Mouse Logitech G602
Keyboard Cherry MX Board 6.0 (mx red switches)
Software Win 10 & Linux Mint
Benchmark Scores https://hwbot.org/user/infrared
Good info, thanks for posting that :)
 
Top