Razer Destructor Gaming Mouse Mat

Frederik S · 01-19-2008, 12:50 PM

To read this review go to: http://www.techpowerup.com/reviews/Razer/Destructor/

Please Digg the review to help us promote it.

PimpUigi · 02-15-2008, 04:23 AM

Hey, anyone know what lift off distance the Razer DeathAdder has on this pad?

Snipe343 · 02-15-2008, 04:25 AM

probely the same as anything

CH33T03S · 02-15-2008, 02:48 PM

I was considering this so thanks for the review! It helps my decision.

PimpUigi · 02-16-2008, 01:26 AM

The same as anything???

Well, the Steelpad 4D has 1.2 mm lift off (or 1 CD high)
Most cloth pads have 2.4 mm lift off (2 CD's high)
Some pads have 3.6 mm lift off, which is getting pretty bad.

DeathAdder also skips pixels on a lot of surfaces, like the new Steelpad S&S...yet not the old S&S.
Weird.

flashstar · 02-16-2008, 05:54 AM

My 'pad has a 7mm lift off!

Frederik S · 02-17-2008, 01:13 PM

I haven't had any problems with the DeathAdder skipping on the S&S at all. Sure you have updated its firmware PimpUigi? I will test the exact lift-off distance on the Destructor later today. Lift-off distance was not a problem for me so I guess it is about 2 mm without knowing it precisely. Stay tuned for a small update.

3 mm from the hard plastic bottom of the mouse to the pad. With normal feet on that equals about 2.5 mm lift-off distance. With normal after market thick teflon feet about 2 mm. So a normal lift-off distance nothing horrible.

01-19-2008, 12:50 PM	#1
Frederik S Join Date: Mar 2006 Location: Søllerød, Denmark Posts: 409 (0.31/day) Thanks: 10 Thanked 47 Times in 37 Posts System Specs	Razer Destructor Gaming Mouse Mat To read this review go to: http://www.techpowerup.com/reviews/Razer/Destructor/ Please Digg the review to help us promote it. Last edited by W1zzard; 01-27-2008 at 04:24 PM.

Processor:	C2D E8200 @ 3.4
Motherboard:	Gigabyte P35C-DS3R
Cooling:	3DMercury
Memory:	Corsair 4-4-4-12 4 GB DDR-1066
Video Card:	Inno3D 8800GTS 320MB @ 648 Mhz Core / 1000 MHz RAM
Harddisk:	WD Raptor 2 x 150GB RAID 0, Hitachi Deskstar 400 GB
CD/DVD Drive:	Pioneer DVD-RW
CRT/LCD Model:	HP LP2475w
Case:	Gigabyte 3DMercury
Sound Card:	On-board, Travagan's Green, Octavart "The One" AMP & DAC
PSU:	480 Watt Tagan
Software:	WinXP Pro SP2

02-15-2008, 04:25 AM	#3
Snipe343 Join Date: Jul 2007 Location: United States, OH Posts: 925 (1.09/day) Thanks: 152 Thanked 32 Times in 31 Posts System Specs	probely the same as anything __________________ “Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.”

Processor:	Athlon 64 x2 4000+ @ 3.0ghz stable
Motherboard:	GIGABYTE GA-MA790X-DS4
Memory:	Crucial Ballistix 2Gb 2x1gb
Video Card:	GeForce 8600GT
Harddisk:	250gb Sata SG
CD/DVD Drive:	Sony/NEC DVD
CRT/LCD Model:	22" 1080p ASUS
Case:	XION Solaris Green
Sound Card:	On-board
PSU:	Thermaltake 430W
Software:	Vista Ultimate 32-bit

02-15-2008, 02:48 PM	#4
CH33T03S Join Date: Jan 2008 Posts: 29 (0.04/day) Thanks: 2 Thanked 3 Times in 3 Posts	I was considering this so thanks for the review! It helps my decision. __________________ Gigabyte GA-K8N Ultra SLI \| Palit 8800 GT Super + 1GB \| AMD Athlon 64 X2 3800+ \| WD Sata 160GB HD \| 2 GB AData DDR 400 \| Sound Blaster Audigy 2ZS Gamer [img disabled]http://cache.www.gametracker.com/server_info/66.102.113.42:28960/b_560x95.png[/img]

02-15-2008, 04:23 AM	#2
PimpUigi Join Date: Jun 2007 Posts: 5 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	Hey, anyone know what lift off distance the Razer DeathAdder has on this pad?

02-16-2008, 01:26 AM	#5
PimpUigi Join Date: Jun 2007 Posts: 5 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	The same as anything??? Well, the Steelpad 4D has 1.2 mm lift off (or 1 CD high) Most cloth pads have 2.4 mm lift off (2 CD's high) Some pads have 3.6 mm lift off, which is getting pretty bad. DeathAdder also skips pixels on a lot of surfaces, like the new Steelpad S&S...yet not the old S&S. Weird.

02-16-2008, 05:54 AM	#6
flashstar Join Date: Dec 2007 Posts: 436 (0.63/day) Thanks: 50 Thanked 58 Times in 52 Posts System Specs	My 'pad has a 7mm lift off!

System Name:	Einstein III
Processor:	3800+ X2 @ 2.50 ghz
Motherboard:	Abit Fatal1ty AN8 SLI
Cooling:	Thermalright SI-120 with Oversized Panaflo
Memory:	2gb Patriot DDR PDC2G4000ELK
Video Card:	2900XT w/ Accelero 2900 (870/927)
Harddisk:	2x 80 GB Hitachi in RAID 0
CD/DVD Drive:	Benq DW-1640 (Best DVD+-RW Ever)
CRT/LCD Model:	Samsung BW206
Case:	Aero Cool Jet Jr.
Sound Card:	X-FI Xtreme Music
PSU:	Cooler Master Real Power Pro 750
Benchmarks:	3d Mark 06: 8999 (8.1) 8870 (7.12)

02-17-2008, 01:13 PM	#7
Frederik S Join Date: Mar 2006 Location: Søllerød, Denmark Posts: 409 (0.31/day) Thanks: 10 Thanked 47 Times in 37 Posts System Specs	I haven't had any problems with the DeathAdder skipping on the S&S at all. Sure you have updated its firmware PimpUigi? I will test the exact lift-off distance on the Destructor later today. Lift-off distance was not a problem for me so I guess it is about 2 mm without knowing it precisely. Stay tuned for a small update. 3 mm from the hard plastic bottom of the mouse to the pad. With normal feet on that equals about 2.5 mm lift-off distance. With normal after market thick teflon feet about 2 mm. So a normal lift-off distance nothing horrible. Last edited by Frederik S; 02-17-2008 at 04:13 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Razer DeathAdder	Frederik S	Reviews	37	04-15-2009 12:33 PM
OCZ Equalizer Gaming Mouse	Frederik S	Reviews	2	10-18-2008 11:19 PM
Razer Lachesis	Frederik S	Reviews	27	08-10-2008 03:55 AM
Razer Diamondback 3G	Frederik S	Reviews	14	10-02-2007 05:55 PM
Review Steelpad 5L	Frederik S	Reviews	2	04-14-2006 03:42 PM