DD's New CoolerMaster Cosmos S

DanishDevil · Mar 21, 2008

I've been messing around with Google SketchUp (recommended to me by Christine aka calvary1980), and I wanted to show you guys what I came up with so far for the front panel of the Cosmos S.

I did my best to make this to scale, but it's hard to tell exactly how much the "handles" and "feet" factor into the height and width.

We've got TEN 5.25 bays to work with, so I thought, why not use nine for 120mm fans?

I'd like to eventually make a piece of modder's mesh that replaces the perforated aluminum (colored in dark gray in my sketch) for the nine bays that will house the fans. The "bay" below the last fan is actually not a bay (I don't think), so that would be perfect for...90degree barbs! :rockout:

I'm going to mod this thing to take TWO Triple 120mm Radiators. That will also balance out the airflow. One 120mm intake on the bottom, three intake in front, one exhaust out back, and three exhaust on top. Keep in mind, the PSU has its own air duct, so the PSU's fan will not factor into the system.

I plan to use A.C. Ryan Blackfire 4 UV LED Fans.

Let me know what you guys think! More messing around to come before the case arrives!

By the way, I kinda wanted to show this off

Very subtle 3D characteristics on the DVD Burner. It's amazing what this program can do!

calvary1980 · Mar 21, 2008

pretty cool. did you read the book I sent you? it will teach you to draw and scale precisely to any measurement, 2 Triple Rad seems pretty extreme to me. im not really a fan of radiators in the front or anything that interrupts the intake (right) to exhaust (left) traditional cooling.

- Christine

DanishDevil · Mar 21, 2008

Thanks. And I won't be slapping two in there right away. It's the fact that I can that makes it cool. I'm sure I'll only use one. Then again, the Swiftech QPs are only about $50 a piece. It would work nicely for a dual loop.

I hate reading, so this is just all play work so far. I'll probably read it sometime this summer

I have looked stuff up, though. I just can't read on a computer screen for too long...unless it's a forum I guess!

calvary1980 · Mar 21, 2008

yeah Google Sketchup is an awesome program, ive been putting it off because I ran out of dexedrine which is also effecting my gaming performance.

by the way where were you planning on mounting the hard drive? you know the cosmos comes with a 4:3 module.

- Christine

DanishDevil · Mar 21, 2008

I was going to put the HD in the module for now. I like the modules from the ThermalTake Armor series better, though. I have a spare steel one, but I'd like to use aluminum. They're not 4:3, but 3:3.

Can't decide whether I want to mount 3 of those or if just one on top will be enough, or what. I'd like to have the bottom fan stay as unobstructed as possible for airflow towards the GPUs. Either that or I could find a cool place to mount it

PS: Mentioned you in 1st post

calvary1980 · Mar 21, 2008

4:3 module, same as the Stacker however the module it self is updated im pretty sure it fits 4 hard drives in 3 bays

I just don't see how your going to fit a thick radiator in the front without clearance problems.

- Christine

DanishDevil · Mar 21, 2008

Well, I plan on pretty much doing away with the bay covers, as they're almost as thick as a radiator, and replace them with modder's mesh. It shouldn't be hard to do at all because of the little doors that swing out. I'll be able to tell more once I've actually got the case, though.

DanishDevil · Mar 21, 2008

Done for tonight. It's about 4AM.

calvary1980 · Mar 21, 2008

look at this, new Centurion 590 is out. http://www.newegg.com/Product/Product.aspx?Item=N82E16811119152

it's a fusion of the Centurion and 690, has a Cooler Master Cosmos S 4:3 Module.

this case is so going to destroy the Antec 900.

- Christine

DanishDevil · Mar 21, 2008

That's the one you've been waiting for, huh?

Wow, almost as many 120mm fan mounts as my build here

Not a bad price either. Still to square for me, though.

BED TIME. Gnight.

calvary1980 · Mar 21, 2008

even resembles the 900 a little except it's made out of cold rolled steel and has all the 690 features like cable management can even fit 1 extra fan (8x 120mm) even has the absorbing material under the power supply bay I think, looks like they changed the side panel and of course the hard drive rack is now a 4:3 module.

Dark request a sample!

- Christine

Grings · Mar 21, 2008

heres a thermochill 120.3 sketchup model if thats any use to you

DanishDevil · Mar 21, 2008

Thanks Grings. I'll see if I can incorporate it.

Here's the top panel connections done. I love messing with this program!

I set the top as transparent for now...

Exavier · Mar 22, 2008

Watching this, I'm intending to get myself the Cosmo-S but I wanted to know if I could mod it without having to hack the bottom away like others I've seen...
Thanks for testing this for me, DD ;D
haha
What's also great about this idea is the fact that if you get spare covers, you've got yourself a modular dual-loop for when you just don't need it..

DanishDevil · Mar 22, 2008

Hack the bottom away? I wouldn't mess with the bottom at all other than maybe cut out the mesh for better airflow from the fans.

And yeah, I'd love to eventually have two triple rads, the first for the CPU and NB and the second for dual 4870X2s or something LMAO. Like I'll ever have that kind of money...

DanishDevil · Mar 25, 2008

Started playing again. Here's the mock A.C. Ryan UV LED Fans:

I'm gonna mess with the opacity of the blue color more so it's not quite so transparent.

Fitseries3 · Mar 25, 2008

looks good so far. when you getting the case?

DanishDevil · Mar 25, 2008

Confirmed with USPS this morning that it should be there no later than Thursday!

Fitseries3 · Mar 25, 2008

ever ordered from clubIT? i ordered my q6700 friday night and havent heard anything at all from them. no tracking number or email. all i have is the order recieved email and payal reciept.

DanishDevil · Mar 25, 2008

I ordered my Logitech G9 from them. They don't rush on the processing. I don't think they do weekends either, especially Easter weekends. You very well may not get it until this weekend. I remember it taking a 3-4 days longer than when I ordered stuff from Newegg. But when the price is right...

DaedalusHelios · Mar 25, 2008

That looks alot easier to use than Adobe Illustrator.

Google Sketch up..... I am gonna try to use that. Does it use paths?

DanishDevil · Mar 25, 2008

Don't know what paths are... :banghead:

You make a 2d shape, and "pull" or "push" it to 3D. I've spent a total of like 20 hours messing with the program, and I can already do this. It's far from perfect, but for a rough estimate with everything pretty close to scale, it's really useful.

DaedalusHelios · Mar 25, 2008

fitseries3 said:
ever ordered from clubIT? i ordered my q6700 friday night and havent heard anything at all from them. no tracking number or email. all i have is the order recieved email and payal reciept.

I haven't heard from them either about the Q6700 I bought from them. Thanks for letting me in on the info so I knew about it.

DaedalusHelios · Mar 25, 2008

DanishDevil said:
Don't know what paths are...

You make a 2d shape, and "pull" or "push" it to 3D. I've spent a total of like 20 hours messing with the program, and I can already do this. It's far from perfect, but for a rough estimate with everything pretty close to scale, it's really useful.

Paths are kinda like CAD in that if you up the resolution of your image the paths adjust automatically so it always stays sharp even though you increased the surface area rendering.
Automatic AA for your illustrations basically.

DanishDevil · Mar 25, 2008

Not sure. I haven't exactly read the book that Christine sent me. There probably are. I could send it to you if you like. It's a PDF.

System Name	Big Devil
Processor	Intel Core i5-2500K
Motherboard	ECS P67H2-A2
Cooling	XSPC Rasa \| Black Ice GT Stealth 240 \| XSPC X2O 750 \| 2x ACF12PWM \| PrimoChill White 7/16"
Memory	2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s)	EVGA GTX 780 ACX SC
Storage	Intel 520 Series 180GB + WD 1TB Blue
Display(s)	HP ZR30W 30" 2650x1600 IPS
Case	Corsair 600T SE
Audio Device(s)	Xonar Essence STX \| Sennheisser PC350 "Hero" Modded \| Corsair SP2500
Power Supply	ABS SL 1050W (Enermax Revolution Rebadge)
Software	Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores	Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps \| Razer Deathadder Black

Processor	Intel Core 2 Quad Q6600 Kentsfield L724A629 @ 3.8Ghz 423x9 1.47v
Motherboard	Abit IP-35 Pro Beta 16.B04 (vDroop)
Cooling	6x Scythe S-Flex SFF21F, EK Multi Option 2 Port, dB-1 Compact, Swiftech MCR80, Swiftech Apogee GT
Memory	2x1 OCZ Flex XLC PC-9200 @ 5-5-5-18 1220 2.3v
Video Card(s)	Inno3D Geforce 8800GTS 320
Storage	Western Digital Raptor X 150
Display(s)	Samsung Syncmaster 226BW 22"
Case	Cooler Master RC-690
Audio Device(s)	Creative SoundBlaster X-Fi Xtreme Gamer 7.1
Power Supply	Thermaltake ToughPower 1000

System Name	Big Devil
Processor	Intel Core i5-2500K
Motherboard	ECS P67H2-A2
Cooling	XSPC Rasa \| Black Ice GT Stealth 240 \| XSPC X2O 750 \| 2x ACF12PWM \| PrimoChill White 7/16"
Memory	2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s)	EVGA GTX 780 ACX SC
Storage	Intel 520 Series 180GB + WD 1TB Blue
Display(s)	HP ZR30W 30" 2650x1600 IPS
Case	Corsair 600T SE
Audio Device(s)	Xonar Essence STX \| Sennheisser PC350 "Hero" Modded \| Corsair SP2500
Power Supply	ABS SL 1050W (Enermax Revolution Rebadge)
Software	Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores	Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps \| Razer Deathadder Black

Processor	Intel Core 2 Quad Q6600 Kentsfield L724A629 @ 3.8Ghz 423x9 1.47v
Motherboard	Abit IP-35 Pro Beta 16.B04 (vDroop)
Cooling	6x Scythe S-Flex SFF21F, EK Multi Option 2 Port, dB-1 Compact, Swiftech MCR80, Swiftech Apogee GT
Memory	2x1 OCZ Flex XLC PC-9200 @ 5-5-5-18 1220 2.3v
Video Card(s)	Inno3D Geforce 8800GTS 320
Storage	Western Digital Raptor X 150
Display(s)	Samsung Syncmaster 226BW 22"
Case	Cooler Master RC-690
Audio Device(s)	Creative SoundBlaster X-Fi Xtreme Gamer 7.1
Power Supply	Thermaltake ToughPower 1000

System Name	Big Devil
Processor	Intel Core i5-2500K
Motherboard	ECS P67H2-A2
Cooling	XSPC Rasa \| Black Ice GT Stealth 240 \| XSPC X2O 750 \| 2x ACF12PWM \| PrimoChill White 7/16"
Memory	2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s)	EVGA GTX 780 ACX SC
Storage	Intel 520 Series 180GB + WD 1TB Blue
Display(s)	HP ZR30W 30" 2650x1600 IPS
Case	Corsair 600T SE
Audio Device(s)	Xonar Essence STX \| Sennheisser PC350 "Hero" Modded \| Corsair SP2500
Power Supply	ABS SL 1050W (Enermax Revolution Rebadge)
Software	Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores	Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps \| Razer Deathadder Black

DD's New CoolerMaster Cosmos S

Which color combination should I get for my fans?

Straight Orange.

Blue fan with Orange housing and sleeving.

Orange fan with Blue housing and sleeving.

Option two for intake, option three for exhause.

Something else...

DanishDevil

calvary1980

New Member

DanishDevil

calvary1980

New Member

DanishDevil

calvary1980

New Member

DanishDevil

DanishDevil

calvary1980

New Member

DanishDevil

calvary1980

New Member

Grings

DanishDevil

Exavier

New Member

DanishDevil

DanishDevil

Fitseries3

Eleet Hardware Junkie

DanishDevil

Fitseries3

Eleet Hardware Junkie

DanishDevil

DaedalusHelios

DanishDevil

DaedalusHelios

DaedalusHelios

DanishDevil

Processor	R7 5800x3D
Motherboard	MSI x570 Tomahawk
Cooling	XSPC Raystorm Edge,EK QS P420M,EK D5pwm Revo Res
Memory	32gb Corsair Vengeance RT 3600 cl16
Video Card(s)	Zotac 3070ti Amp Extreme
Storage	Samsung 980pro 1tb x2
Display(s)	MSI MPG321QRF QD
Case	Corsair 7000D
Power Supply	EVGA 1000 P2
Mouse	G900
Keyboard	Corsair k60 RGB PRO
Software	Win 11

Processor	Q6600 G0 Stepping @3.4
Motherboard	DFI LanParty DK P45 T2RS-PLUS
Cooling	Fitseries3 Edition Fuzion v1, XSPC Razor X2, XSPC RS320, Hydor L30
Memory	Crucial Ballistix @972mhz CL5
Video Card(s)	Sapphire 4870X2 2GB
Storage	Samsung Spinpoint F1 1TB x2 (I need another OS drive LOL)
Display(s)	Sony Bravia 40L4000 40" HDTV :D
Case	Silverstone TJ07 (Mod is a WIP)
Power Supply	Corsair HX620w
Software	Windows Vista

System Name	Cosmos F1000
Processor	i9-9900k
Motherboard	Gigabyte Z370XP SLI, BIOS 15a
Cooling	Corsair H100i, Panaflo's on case
Memory	XPG GAMMIX D30 2x16GB DDR4 3200 CL16
Video Card(s)	EVGA RTX 2080 ti
Storage	1TB 960 Pro, 2TB Samsung 850 Pro, 4TB WD Hard Drive
Display(s)	ASUS ROG SWIFT PG278Q 27"
Case	CM Cosmos 1000
Audio Device(s)	logitech 5.1 system (midrange quality)
Power Supply	CORSAIR HXi HX1000i 1000watt
Mouse	G400s Logitech
Keyboard	K65 RGB Corsair Tenkeyless Cherry Red MX
Software	Win10 Pro, Win7 x64 Professional