Asrock Dual sata socket 939 agp/pci-e board

sol.fides · Nov 21, 2005

Hey guys, I ran into a wall at 253HTT.. wouldn't post in all 1.2, 1.4 and OCW beta 3
252 wouldn't reboot
251 was stable

HTT multiplier was down to 3x (600) to remove it
CPU multiplier was at 8x (anything below resets after 1 reboot.. both bios'..another problem?)
Still well within bootable range
Memory capable of 250 at the timings but was divided to 3:5 so problem there..

Any ideas? Any additional info needed?

3200+ Vanice E6 @ 251x9 (2.25GHz)
Corsair XMS pc3200xlpt v1.1 @ 1:1 (251MHZ) 2.5-3-3-7
BFG 6600GT AGP @ 560/1140
ASRock Dual-SATA2 ULI 1695
Antec True 430

W1zzard · Nov 21, 2005

try setting memory to 100 mhz and see if that fixes it ..

sol.fides · Nov 21, 2005

Forgive me, it meant to say so *no* problem there. I had it running at 3:5 which is ~166MHz at 2.5-3-3-7 during testing. It is now running at 251MHz 2.5-3-3-7 Prime95 stable. So i don't imagine its a problem.
I did try to look for how to set to 100MHz.. Crazyrhino @ OCW forums said use windows based A64tweaker .31 ... to change bios?!!

I'd also like to confirm that CPU multipliers x6 and x7 are not available for my processor. I have found two other posts refering to cpus having their multipliers reset when at these values. One was a Venice ES 'engineering sample'. Mine is A Venice E6.

kool168 · Nov 24, 2005

steiner666 said:
right now i'm running

255x11 at 1.55volts

ram 166 divider at "high" settings (need booster)
timings 2-3-2-5-1t (the default for my 2gb OCZ Plat)

CPU-NB speed 800
NB-SB speed 1000

and running OCWB1 bios

If i could get more voltage than 2.7 to my RAM i know it could keep up with me CPU at 3.0ghz but right now it doesnt have the juice to keep a stable 227mhz. I'm stable at my stock timings if i put a 133 divider at 3ghz and of course bump the CPU-NB speed down to 600.

If youre CPU-NB speed stays under 1000 with your overclock then you might just need more voltage to your core, thankfully the vcore mod was really easy to do.

as to my PSU its on my sig

hey i got the same CPU as you, so i think i could use your setting and try? what's your most stable setting before the vmod ?
how to determine the most efficient CPU-NB speed and how does it work?

thanks

W1zzard · Nov 24, 2005

you want the link between cpu and nb run at around 1000 mhz ..
on the board the bios lists frequencies not multipliers .. so 1000 mhz = x5, 800 mhz = x4, 600 mhz = x3 and so on

if you run at 250 mhz for example, the default of x5 would give you 1250 mhz, which is too high, so drop the multi to 4 (800 mhz setting) and you are back at 1 ghz ht

kool168 · Nov 24, 2005

W1zzard said:
you want the link between cpu and nb run at around 1000 mhz ..
on the board the bios lists frequencies not multipliers .. so 1000 mhz = x5, 800 mhz = x4, 600 mhz = x3 and so on

if you run at 250 mhz for example, the default of x5 would give you 1250 mhz, which is too high, so drop the multi to 4 (800 mhz setting) and you are back at 1 ghz ht

thanks thanks

also i am wondering what does tighting memory timing do? if i have cheap ram (Samsung (PC-3200) DDR400 ), am i better off just to leave the settings as AUTO? since i can't achive good timing with my ram?

W1zzard · Nov 24, 2005

auto will just select some timings based on what the board thinks is good for you .. play a bit with them and see how much performance you can gain .. 3dmark01 is a good real-world benchmark for memory performance (given you a modern video card which isnt limiting the benchmark)

kool168 · Dec 18, 2005

anyone one could teach me how to run both AGP and PCI-E at the same time?
can i just plug the tv to the AGP (9800 xt), and plug LCD mon to PCI-E (x850 xtpe) for gaming?
how to config them in ATI controller? and how will the video drivers work?

is there any benefits and down sides on doing that?

steiner666 · Dec 18, 2005

i'm gonna point you in the same direction others pointed me in for any questions you have on this mobo: http://www.ocworkbench.com/ocwbcgi/...30;hardset=0;start_point=0;DaysPrune=0&r=actu You can find a thread on almost anything relating to this board there.

System Name	blimp
Processor	E8600
Motherboard	Asus P5K Deluxe
Cooling	Scythe Infinity w/ Dual SFF21F fans
Memory	4gb ddr2-800 crucial balistix
Video Card(s)	EVGA 8800GT (705*950)
Storage	intel g2 80gb, x2 WD-640ls RAID0, WD-1002EX
Display(s)	2x Dell 2007WFP 20"
Case	CM Stacker 830 w/ 4x140mm & 3x120mm
Audio Device(s)	Soundblaster X-fi Fatal1ty FPS, Klipsch 2.1 & logitech 330
Power Supply	Corsair HX1000
Software	F@H 24/7
Benchmark Scores	Lappy: g51vx

Processor	Ryzen 7 5700X
Memory	48 GB
Video Card(s)	RTX 4080
Storage	2x HDD RAID 1, 3x M.2 NVMe
Display(s)	30" 2560x1600 + 19" 1280x1024
Software	Windows 10 64-bit

System Name	blimp
Processor	E8600
Motherboard	Asus P5K Deluxe
Cooling	Scythe Infinity w/ Dual SFF21F fans
Memory	4gb ddr2-800 crucial balistix
Video Card(s)	EVGA 8800GT (705*950)
Storage	intel g2 80gb, x2 WD-640ls RAID0, WD-1002EX
Display(s)	2x Dell 2007WFP 20"
Case	CM Stacker 830 w/ 4x140mm & 3x120mm
Audio Device(s)	Soundblaster X-fi Fatal1ty FPS, Klipsch 2.1 & logitech 330
Power Supply	Corsair HX1000
Software	F@H 24/7
Benchmark Scores	Lappy: g51vx

Processor	Ryzen 7 5700X
Memory	48 GB
Video Card(s)	RTX 4080
Storage	2x HDD RAID 1, 3x M.2 NVMe
Display(s)	30" 2560x1600 + 19" 1280x1024
Software	Windows 10 64-bit

Processor	Ryzen 7 5700X
Memory	48 GB
Video Card(s)	RTX 4080
Storage	2x HDD RAID 1, 3x M.2 NVMe
Display(s)	30" 2560x1600 + 19" 1280x1024
Software	Windows 10 64-bit

Asrock Dual sata socket 939 agp/pci-e board

sol.fides

New Member

W1zzard

Administrator

sol.fides

New Member

kool168

New Member

W1zzard

Administrator

kool168

New Member

W1zzard

Administrator

kool168

New Member

steiner666

New Member

System Name	Ubelsteiner Rig
Processor	Intel Q9550 @ 3.5ghz
Motherboard	Asus P5E-VM HDMI
Cooling	Zalmann 8700
Memory	4x2GB G.Skill DDR2-1000
Video Card(s)	EVGA GTX570 (900/1600/2000)
Storage	2x250gb WD Caviar in RAID-0 (primary), 1x WD 1TB green (storage)
Display(s)	Mitsubishi 60" 3D DLP TV
Case	In-Win Dragonslayer
Audio Device(s)	Creative X-Fi XtremeMusic
Power Supply	Antec EarthWatts 650w (+12v1: 22A,+12v2: 22A,+12V3 25A)
Software	Win7 Ultimate x64