- Joined
- May 31, 2007
- Messages
- 1,051 (0.17/day)
- Location
- Port Fairy, Victoria, Australia
System Name | Rampage 3.0 |
---|---|
Processor | i7 3770K 4.2Ghz |
Motherboard | ASRock Z77 Extreme 4 |
Cooling | Corsair 110 (280mm rad) |
Memory | 16GB G.Skill Sniper F3-1866 10-11-10 CR1 |
Video Card(s) | 2 X gigabyte 7970 ghz edition @1100mhz / 6000mhz |
Storage | samsung 500 GB + 128GM crucial M4 ssd |
Display(s) | LG IPS235P 23in IPS 1080p |
Case | corsair vengance c70 - white |
Audio Device(s) | On Board |
Power Supply | Corsair HX-750w |
Software | Windows 7 Ultimate 64 bit |
I have just received my BFG GTX 280 OC today and i thought i would let you know the results of a few test i have ran
Q6600 @ 3.2 ghz (400*8)
8 gig ram 4-4-4-12
stock card 615/1350/1107
3D mark 05 -19062
3D mark 06 -15638
crysis 1680*1050 X64 DX10
min/max//average
high 0AA -25/53//41
high 2AA -23/45//35
high 4AA -22/43//34
very high 0AA -19/29//24
very high 2AA -15/23//20
very high 4AA -14/22//19
over clocked 650/1426/1296
3D mark 05 -19299
3D mark 06 -16026
crysis 1680*1050 X64 DX10
min/max//average
high 0AA -24/55//41
high 2AA -26/47//38
high 4AA -23/45//36
very high 0AA -19/31//25
very high 2AA -16/25//21
very high 4AA -15/23//20
would i be correct in thinking from these quick tests that the GTX 280 appears to very CPU limited even with a q6600 @ 3.2 ghz?
any thoughts or ideas let me know, or any other tests you would like me to run also let me know and i will be happy to do what i can.
*edit* speed step is ENABLED + the idle temps in pic below are not true idle + 4v in cpu-z is a bug i get sometimes...
*edit X2* do you think i have tamed crysis on very high with X2aa with a average of 24fps ???? (pics takes after 3 runs of crsyis benchmark, initial scores taken after 1 run (i was in a hurry))
Q6600 @ 3.2 ghz (400*8)
8 gig ram 4-4-4-12
stock card 615/1350/1107
3D mark 05 -19062
3D mark 06 -15638
crysis 1680*1050 X64 DX10
min/max//average
high 0AA -25/53//41
high 2AA -23/45//35
high 4AA -22/43//34
very high 0AA -19/29//24
very high 2AA -15/23//20
very high 4AA -14/22//19
over clocked 650/1426/1296
3D mark 05 -19299
3D mark 06 -16026
crysis 1680*1050 X64 DX10
min/max//average
high 0AA -24/55//41
high 2AA -26/47//38
high 4AA -23/45//36
very high 0AA -19/31//25
very high 2AA -16/25//21
very high 4AA -15/23//20
would i be correct in thinking from these quick tests that the GTX 280 appears to very CPU limited even with a q6600 @ 3.2 ghz?
any thoughts or ideas let me know, or any other tests you would like me to run also let me know and i will be happy to do what i can.
*edit* speed step is ENABLED + the idle temps in pic below are not true idle + 4v in cpu-z is a bug i get sometimes...
*edit X2* do you think i have tamed crysis on very high with X2aa with a average of 24fps ???? (pics takes after 3 runs of crsyis benchmark, initial scores taken after 1 run (i was in a hurry))
Attachments
-
GTX 280 screen shot.jpg206.8 KB · Views: 383
-
P6200048.JPG147.3 KB · Views: 355
-
P6200050.JPG148.4 KB · Views: 374
-
P6200052.JPG150.6 KB · Views: 355
-
P6200057.JPG148.4 KB · Views: 383
-
3dm05 19210.jpg130.2 KB · Views: 337
-
3dm06 - little low.jpg132 KB · Views: 341
-
crysis bmark ultra - 0AA.jpg174.2 KB · Views: 409
-
crysis bmark ultra - 2AA.jpg173.3 KB · Views: 439
Last edited: