0.25 Beta 10

W1zzard · 11-21-2005, 06:54 PM

- Dump Bios button on X1000 Series disabled until fix is found
- Artifact scanning should work better now
- Voltages can be saved to a profile and loaded on startup
- Fixed "New Malware.H" misdetection by McAfee
- Fixed "PCK/Morphine" misdetection by AntiVir PersonalEdition
- Fixed minor issue with profiles storing extended NVIDIA clocks
- Fixed warning "Alternate Pixelcenter"
- Added option to swap GPU and GPU environment temperature (cosmetic change for some ASUS NVIDIA cards)
- Temperature monitoring is back for NVIDIA cards
- Broken dialog sizes fixed on non-standard screen DPI settings

Download here: http://www.techpowerup.com/downloads/104

deathman20 · 11-29-2005, 09:47 PM

Now where talking

Mize · 11-29-2005, 09:54 PM

anyone use this on an XT yet

Okay I did. VPU recover at 661 when Overdrive gets me 690...? (GPU)

W1zzard · 11-29-2005, 10:10 PM

tried clocking in small steps?

deathman20 · 11-29-2005, 10:11 PM

Man im eager to test this out.... 30min til I leave work another 30min to drive home, doh an hour longer

Mize · 11-29-2005, 10:13 PM

Quote:

Originally Posted by W1zzard

tried clocking in small steps?

"Find Max"

I can run through 3dm5 without a vpu recover using overdrive at 690...?

W1zzard · 11-29-2005, 10:15 PM

oh find max is working now? excellent

W1zzard · 11-29-2005, 10:15 PM

set your clock to 690 using ccc and start scan for artifacts ... any errors?

SPHERE · 11-29-2005, 10:18 PM

w00t!!! d/ling

OneCool · 11-29-2005, 10:38 PM

SWEET!!!!!

Im on it!!!!!!!!

Mize · 11-29-2005, 10:46 PM

Quote:

Originally Posted by W1zzard

set your clock to 690 using ccc and start scan for artifacts ... any errors?

Did this (though ATI Tool still said 599) and no artifacts. Not sure I was really at 690 or not ??

Edit: also I was at a lower temp in this exercise than at 661 with "find max" (80 vs 83)

Oops - ATI X1800-XT

OneCool · 11-29-2005, 11:03 PM

I still get ALot of stange things going on with the X1800XT.

Is there any certain way I/we should be appoaching this?

OneCool · 11-29-2005, 11:21 PM

I hope the ATItool software was wrong!!

I have no beef at all but I ran a "find max core" test and the AMPs were bouncing between 27.5 and 30amps!

there was tearing from the time I hit the test button..it got to 673 and just froze

spajdr · 11-29-2005, 11:24 PM

tried to find max core, but when i press show 3d view, it already looking like this

thats with stock voltage and clocks, when i press find max core clock, it actually underclock below 499

deathman20 · 11-29-2005, 11:29 PM

Oh well Max Core/Mem isn't working on my XL. Was worth a shot.

deathman20 · 11-29-2005, 11:30 PM

NM got it to work. Its working with Use Old method. Testing core clock right now.

spajdr · 11-29-2005, 11:32 PM

Quote:

Originally Posted by deathman20

NM got it to work. Its working with Use Old method. Testing core clock right now.

thanks for a tip mate, works now

deathman20 · 11-29-2005, 11:33 PM

Yup to 533 currently, if not mistaken 560 was the max I could get around stock volts, so a few more min.

553 hard locked

Well at least locked up the video couldn't see the screen, did a reboot though.

OneCool · 11-29-2005, 11:39 PM

I wish you people would post what card you have!!!!!!!!!!!!!

Would help ALOT!!!!!!!!!!!!!!!!

atomicpineapple · 11-29-2005, 11:41 PM

Still have the problem when setting core frequency in ATI tool and running a 3d app results in ATITool displaying a very low core frequency (475MHz in my case) when I exit the 3d app, was using 3d mark 2003, running a few secs of GT1. FPS were lower than stock too so it looks like it does actually drop the core frequency. Im running with CCC, ATISmart, and ATI Hotkey Poller disabled.

Also 700MHz core on stock volts gives me a blackscreen but 700MHz stock volts is rock solid with OC tool. Any ideas anyone? Using a Powercolor X1800XT 512MB

Just tried artifact scanning and find max core and max mem, works fine on my card using older more compatible mode, normal mode gives same picture as screenie in spajdr's post.

Spider · 11-29-2005, 11:54 PM

On my GF 6800 artifact scanning while i'm overclocking core (manual, or using find max) still doesn't work (tried both new and old method). When I use find max, core overclocks to about 380MHz and then system freezes (probably card automaticaly changes to 2d mode, but because "find max" also overclocks 2d so card crashes). When I manual overclock my core and scan for artifacts strange things happen. It detects no artifacts, but when i close and open again 3d window, there is one big artifact

. Once i had a text saying "delta ... . No artifacts for..." (never seen these things both :P). Haven't tried overclocking mem yet.

There is also "Fan speed". It says 0%.

PS. sorry about my english.

slyder314 · 11-29-2005, 11:55 PM

For me...is exactly like spajdr...and my frequency go down and artifact is detect at stock clock speed.But with manual overclock,my card can take easily 615/650 without any artifact with 1.2v on gpu and 2.0v on ram.

deathman20 · 11-29-2005, 11:57 PM

Auto Memory clocking doesn't seem to work though. Just an update.

atomicpineapple · 11-30-2005, 12:02 AM

For Powercolor X1800XT 512MB OCing memory even slightly (<10MHz) results in black screen as soon as a 3d app initialised, also black screen when core set to anything over 650MHZ. Ok now using + and - buttons to set clocks, and set them to apply instantly, core now lets me run 3d mark at anything ive tried so far (up to 680MHz) but the problem of reporting low clocks upon exit remains.

Flashnc · 11-30-2005, 01:04 AM

Slyder314...

looks like your x1800xl is doing about the same as mine...best stable so far has been @ 607/652....1.2... 2.1... 2.0 ive had it to 620/660 but it wont complete 3dm5

11-21-2005, 06:54 PM	#1
W1zzard Administrator Join Date: May 2004 Location: Stuttgart, Germany Posts: 7,626 (3.78/day) Thanks: 79 Thanked 2,492 Times in 935 Posts System Specs	0.25 Beta 10 - Dump Bios button on X1000 Series disabled until fix is found - Artifact scanning should work better now - Voltages can be saved to a profile and loaded on startup - Fixed "New Malware.H" misdetection by McAfee - Fixed "PCK/Morphine" misdetection by AntiVir PersonalEdition - Fixed minor issue with profiles storing extended NVIDIA clocks - Fixed warning "Alternate Pixelcenter" - Added option to swap GPU and GPU environment temperature (cosmetic change for some ASUS NVIDIA cards) - Temperature monitoring is back for NVIDIA cards - Broken dialog sizes fixed on non-standard screen DPI settings Download here: http://www.techpowerup.com/downloads/104 Last edited by W1zzard; 11-29-2005 at 09:44 PM.

Processor:	Intel Core Duo E6600 @ 3.4 GHz
Motherboard:	ABIT AW9D-MAX
Cooling:	Scythe Infinity
Memory:	2x 2048MB Mushkin PC2-8800
Video Card:	GeForce GTX 260 896 MB
Harddisk:	74 GB WD Raptor, 250 GB WD Caviar SE, 500 GB WD Caviar
CD/DVD Drive:	BenQ DW1640
CRT/LCD Model:	Dell 2001FP 20.1" TFT, 1600x1200 + 19" 1280x1024
Case:	Thermaltake Eureka
Sound Card:	On-board Realtek HD
PSU:	Zalman ZM-850 HP
Software:	Windows XP SP2

Processor:	Opteron 170 Naked @ 2.5Ghz w/ 1.4V
Motherboard:	DFI Ultra-D
Cooling:	CPU: XP-120 GPU: Zalman FS-V7
Memory:	G.Skill PC4000 @ 250Mhz 3-4-4-8 w/ 2.6V
Video Card:	Sapphire X1800XT @ 665/751.5 w/ 1.4/2.087/2.087V
Harddisk:	2x Hatachi 250Gig SATA II's
CD/DVD Drive:	NEC 3500A :)
CRT/LCD Model:	Dell 2405FPW 24" Of Pure Enjoyment
Case:	Antec P180
Sound Card:	Audigy 2
PSU:	OCZ 520W PS
Software:	WinXP Pro.. SP2

11-29-2005, 09:54 PM	#3
Mize Join Date: Nov 2005 Posts: 7 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	anyone use this on an XT yet Okay I did. VPU recover at 661 when Overdrive gets me 690...? (GPU) Last edited by Mize; 11-29-2005 at 10:07 PM.

Processor:	Intel Core Duo E6600 @ 3.4 GHz
Motherboard:	ABIT AW9D-MAX
Cooling:	Scythe Infinity
Memory:	2x 2048MB Mushkin PC2-8800
Video Card:	GeForce GTX 260 896 MB
Harddisk:	74 GB WD Raptor, 250 GB WD Caviar SE, 500 GB WD Caviar
CD/DVD Drive:	BenQ DW1640
CRT/LCD Model:	Dell 2001FP 20.1" TFT, 1600x1200 + 19" 1280x1024
Case:	Thermaltake Eureka
Sound Card:	On-board Realtek HD
PSU:	Zalman ZM-850 HP
Software:	Windows XP SP2

11-29-2005, 09:47 PM	#2
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Now where talking

11-29-2005, 10:10 PM	#4
W1zzard Administrator Join Date: May 2004 Location: Stuttgart, Germany Posts: 7,626 (3.78/day) Thanks: 79 Thanked 2,492 Times in 935 Posts System Specs	tried clocking in small steps?

11-29-2005, 10:11 PM	#5
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Man im eager to test this out.... 30min til I leave work another 30min to drive home, doh an hour longer

11-29-2005, 10:15 PM	#7
W1zzard Administrator Join Date: May 2004 Location: Stuttgart, Germany Posts: 7,626 (3.78/day) Thanks: 79 Thanked 2,492 Times in 935 Posts System Specs	oh find max is working now? excellent

11-29-2005, 10:18 PM	#9
SPHERE Join Date: Mar 2005 Location: arizona (cave creek) Posts: 834 (0.49/day) Thanks: 3 Thanked 1 Time in 1 Post System Specs	w00t!!! d/ling

Processor:	opteron 165
Motherboard:	dfi cfx3200
Cooling:	zalman 7000
Memory:	mushkin xp4000
Video Card:	x1900xt
Harddisk:	4x320 7200.10 raid
CD/DVD Drive:	2xdvd ram
CRT/LCD Model:	21" sony trinitron
Case:	v2000b lianli
Sound Card:	x-fi platinum
PSU:	pcpac 510
Software:	gaydows

11-29-2005, 10:38 PM	#10
OneCool Join Date: Nov 2005 Location: Look behind you!! Posts: 247 (0.17/day) Thanks: 5 Thanked 4 Times in 3 Posts	SWEET!!!!! Im on it!!!!!!!!

11-29-2005, 11:03 PM	#12
OneCool Join Date: Nov 2005 Location: Look behind you!! Posts: 247 (0.17/day) Thanks: 5 Thanked 4 Times in 3 Posts	I still get ALot of stange things going on with the X1800XT. Is there any certain way I/we should be appoaching this?

11-29-2005, 11:21 PM	#13
OneCool Join Date: Nov 2005 Location: Look behind you!! Posts: 247 (0.17/day) Thanks: 5 Thanked 4 Times in 3 Posts	I hope the ATItool software was wrong!! I have no beef at all but I ran a "find max core" test and the AMPs were bouncing between 27.5 and 30amps! there was tearing from the time I hit the test button..it got to 673 and just froze

11-29-2005, 11:24 PM	#14
spajdr Join Date: Oct 2005 Location: Czech Republic Posts: 18 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	tried to find max core, but when i press show 3d view, it already looking like this thats with stock voltage and clocks, when i press find max core clock, it actually underclock below 499

11-29-2005, 11:29 PM	#15
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Oh well Max Core/Mem isn't working on my XL. Was worth a shot.

11-29-2005, 11:30 PM	#16
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	NM got it to work. Its working with Use Old method. Testing core clock right now.

11-29-2005, 11:33 PM	#18
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Yup to 533 currently, if not mistaken 560 was the max I could get around stock volts, so a few more min. 553 hard locked Well at least locked up the video couldn't see the screen, did a reboot though. __________________ The Mobo ----------- DFI LP LT X38-T2R The CPU ------------ E8400 @ 4.05Ghz w/ 1.175V Bios / 1.215V CPU-z The Cooling -------- Thermalright Extreme 120 -- 35C Idle / 51C Load The Memory -------- G.Skill PC-6400 4x1Gig 5-5-5-12 Timings -- 450Mhz w/ 2.09V The GPU's ---------- PowerColor HD4850 XFire 670/1075 and growing -- 48 Idle / 69 Load The HDD’s ---------- 2x 320Gig Seagate Perps in Raid 0 w/ 320Gig HotSwap Backup & 160Gig External Last edited by deathman20; 11-29-2005 at 11:46 PM.

11-29-2005, 11:39 PM	#19
OneCool Join Date: Nov 2005 Location: Look behind you!! Posts: 247 (0.17/day) Thanks: 5 Thanked 4 Times in 3 Posts	I wish you people would post what card you have!!!!!!!!!!!!! Would help ALOT!!!!!!!!!!!!!!!!

11-29-2005, 11:41 PM	#20
atomicpineapple Join Date: May 2005 Location: Cambridgeshire Posts: 40 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts	Still have the problem when setting core frequency in ATI tool and running a 3d app results in ATITool displaying a very low core frequency (475MHz in my case) when I exit the 3d app, was using 3d mark 2003, running a few secs of GT1. FPS were lower than stock too so it looks like it does actually drop the core frequency. Im running with CCC, ATISmart, and ATI Hotkey Poller disabled. Also 700MHz core on stock volts gives me a blackscreen but 700MHz stock volts is rock solid with OC tool. Any ideas anyone? Using a Powercolor X1800XT 512MB Just tried artifact scanning and find max core and max mem, works fine on my card using older more compatible mode, normal mode gives same picture as screenie in spajdr's post.

11-29-2005, 11:54 PM	#21
Spider Join Date: Sep 2005 Location: Warsaw, Poland Posts: 5 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	On my GF 6800 artifact scanning while i'm overclocking core (manual, or using find max) still doesn't work (tried both new and old method). When I use find max, core overclocks to about 380MHz and then system freezes (probably card automaticaly changes to 2d mode, but because "find max" also overclocks 2d so card crashes). When I manual overclock my core and scan for artifacts strange things happen. It detects no artifacts, but when i close and open again 3d window, there is one big artifact . Once i had a text saying "delta ... . No artifacts for..." (never seen these things both :P). Haven't tried overclocking mem yet. There is also "Fan speed". It says 0%. PS. sorry about my english. __________________ Intel Pentium 4 2,4B@2826 15718 Abit IS7-E2* Intel 865PE Leadtek GeForce 6800 128MB *2512MB DDR Dual Channel** Hynix + Samsung 2,5-3-3-7

11-29-2005, 11:55 PM	#22
slyder314 Join Date: May 2005 Location: LaPrairie,Quebec,Canada Posts: 16 (0.01/day) Thanks: 0 Thanked 0 Times in 0 Posts	For me...is exactly like spajdr...and my frequency go down and artifact is detect at stock clock speed.But with manual overclock,my card can take easily 615/650 without any artifact with 1.2v on gpu and 2.0v on ram. __________________ ASUS P5W DH-Deluxe.Intel Core 2 DUO X6800ES,2x1go Mushkin Redline PC8000.HIS HD 2900XT,SoundBlaster X-FI Extreme Music,Raptor-X 150go,Seagate 320go,Maxtor 300go,Maxtor 200go,Thermaltake Pure Power 680w,Vapochill LS(Phase Change Cooling)... ASUS P5B Deluxe,Intel Core 2 DUO E6600,2x1go OCZ Platinum Edition PC6400,BFG 7900GTX,SoundBlaster Audigy 2 ZS,WD 160go,Maxtor 80go,Antec NEO 480w...

11-29-2005, 11:57 PM	#23
deathman20 Join Date: Nov 2005 Posts: 58 (0.04/day) Thanks: 0 Thanked 0 Times in 0 Posts System Specs	Auto Memory clocking doesn't seem to work though. Just an update. __________________ The Mobo ----------- DFI LP LT X38-T2R The CPU ------------ E8400 @ 4.05Ghz w/ 1.175V Bios / 1.215V CPU-z The Cooling -------- Thermalright Extreme 120 -- 35C Idle / 51C Load The Memory -------- G.Skill PC-6400 4x1Gig 5-5-5-12 Timings -- 450Mhz w/ 2.09V The GPU's ---------- PowerColor HD4850 XFire 670/1075 and growing -- 48 Idle / 69 Load The HDD’s ---------- 2x 320Gig Seagate Perps in Raid 0 w/ 320Gig HotSwap Backup & 160Gig External

11-30-2005, 12:02 AM	#24
atomicpineapple Join Date: May 2005 Location: Cambridgeshire Posts: 40 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts	For Powercolor X1800XT 512MB OCing memory even slightly (<10MHz) results in black screen as soon as a 3d app initialised, also black screen when core set to anything over 650MHZ. Ok now using + and - buttons to set clocks, and set them to apply instantly, core now lets me run 3d mark at anything ive tried so far (up to 680MHz) but the problem of reporting low clocks upon exit remains. Last edited by atomicpineapple; 11-30-2005 at 12:24 AM.

11-30-2005, 01:04 AM	#25
Flashnc Join Date: Nov 2005 Posts: 30 (0.02/day) Thanks: 0 Thanked 0 Times in 0 Posts	Slyder314... looks like your x1800xl is doing about the same as mine...best stable so far has been @ 607/652....1.2... 2.1... 2.0 ive had it to 620/660 but it wont complete 3dm5 __________________ P5WDH Deluxe all vmodsVRtrimmers E6600 His X1900CF/His X1900XT 4x1gb F2-6400PHU2-GBHZ 2x 36 raptors Muskin650w AQZ50/Storm/MCR320Rad/2xMCW60/CMStacker

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)