• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

paulieg's first watercooling adventure, help wanted!

Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
U used the tubes that leak hard core!!!!

But they don't bend very easy, I liked using them just beware.

I've put teflon tape around all of the fittings, and the tubes are going to be replaced very soon. How does everyone feel about compression fittings? Oh, and all constructive criticism is welcome!
 
Last edited:
D

Deleted member 24505

Guest
The bp compression fittings are very nice,i'm considering trying them myself,though it will cost me £35($70ish) for enough to do my loop.I'm running my loop with a t-line now,its pretty good,temps are exactly the same with a res.

 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
I've put teflon tape around all of the fittings, and the tubes are going to be replaced very soon. How does everyone feel about compression fittings? Oh, and all constructive criticism is welcome!

Most compression fittings hamper flow a little. If you want good fittings, I'd just go with the bitspower fittings all around, and use stainless steel worm-drive clamps.

Also, I wouldn't personally use the reinforced 1/2 ID tubing. The ID actually tends to be a hair larger than 1/2", and can be a pain to keep from leaking. I would just use plain old clear vinyl tubing. Super cheap and effective. If you want a nice tight seal, use 7/16" ID tubing. It'll squeeze onto 1/2" fittings nice and tight. So tight in fact, that most of the time it won't leak, even without clamps (but still use the clamps. lol)

Your loop order is fine. I prefer putting the rad just before the res, but others say to do it the way you have it. Doesn't really make a whole lot of difference.
 
Joined
Jun 21, 2006
Messages
900 (0.14/day)
Location
Canada
System Name MurderBox #17
Processor Intel Core i7 5930k - 4.5Ghz 1.275v - Bitspower Summit EF
Motherboard Asus X99-E WS - Bitspower THOR AIX99 Full Full Board Block
Cooling SR-1 480, 8x Corsair ML120 , MCP350, I&H Res 250, PETG hard pipe, Mayhems Pastel White
Memory 32GB G.Skill Ripjaws 4 DDR4 2666
Video Card(s) Nvidia GTX 1080 Ti Founders Edition - EK Fullcover waterblock with Backplate
Storage 970 Pro 512GB, 960 EVO 500GB, PM961 512GB, 3x SM951 256GB,, WD Black 2TB, Seagate 4TB
Display(s) ASUS PG348Q 3440x1440, 2X ASUS PB278 2560x1440
Case MurderMod TJ07 With Illuminated mid-plate
Audio Device(s) Schiit Bifrost > Schiit Asgard > Hifiman HE400i - Audio Technica AT2020
Power Supply Corsair AX1200i With custom MDPC Sleeve and Noctua NF-A14 iPPC-3000 PWM
Mouse Steelseries Rival 600
Keyboard Corsair K95 RGB
Software Microsoft Windows 10 Professional 64bit
Really nice job for your first watercooling adventure. You kept the tube lengths to the minimum and the layout is very good. I originally planned on using tubing like that but it was way too stiff and difficult to work with. If you intend in replacing it and the fittings I would say don't bother with compressions because they are way too much money once you add them all up. I would say 7/16th masterclear with either EK, Bitspower or Danger Den 1/2" highflows would be the cheapest setup that would give you the best flow and the tightest seal. I can vouch for the masterclear stuff it is cheap flexible and lasts pretty well.

Other than that I would say it looks sweet and great job :toast:.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Most compression fittings hamper flow a little. If you want good fittings, I'd just go with the bitspower fittings all around, and use stainless steel worm-drive clamps.

Also, I wouldn't personally use the reinforced 1/2 ID tubing. The ID actually tends to be a hair larger than 1/2", and can be a pain to keep from leaking. I would just use plain old clear vinyl tubing. Super cheap and effective. If you want a nice tight seal, use 7/16" ID tubing. It'll squeeze onto 1/2" fittings nice and tight. So tight in fact, that most of the time it won't leak, even without clamps (but still use the clamps. lol)

Your loop order is fine. I prefer putting the rad just before the res, but others say to do it the way you have it. Doesn't really make a whole lot of difference.

I don't really have the option to move to 1/2" fittings, unless I want to replace the Asus NB Fusion block on my Maximus Formula. There is no way to to replace the NB barbs They are built right into the block (I'm not interested in using adapters which seem to create more leak potential). So, I'm really just looking for better 3/8" barbs and tubing.

Cyberdruid is recommending these EK fittings:

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=365&products_id=21944
 
Last edited:
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Joined
Jun 21, 2006
Messages
900 (0.14/day)
Location
Canada
System Name MurderBox #17
Processor Intel Core i7 5930k - 4.5Ghz 1.275v - Bitspower Summit EF
Motherboard Asus X99-E WS - Bitspower THOR AIX99 Full Full Board Block
Cooling SR-1 480, 8x Corsair ML120 , MCP350, I&H Res 250, PETG hard pipe, Mayhems Pastel White
Memory 32GB G.Skill Ripjaws 4 DDR4 2666
Video Card(s) Nvidia GTX 1080 Ti Founders Edition - EK Fullcover waterblock with Backplate
Storage 970 Pro 512GB, 960 EVO 500GB, PM961 512GB, 3x SM951 256GB,, WD Black 2TB, Seagate 4TB
Display(s) ASUS PG348Q 3440x1440, 2X ASUS PB278 2560x1440
Case MurderMod TJ07 With Illuminated mid-plate
Audio Device(s) Schiit Bifrost > Schiit Asgard > Hifiman HE400i - Audio Technica AT2020
Power Supply Corsair AX1200i With custom MDPC Sleeve and Noctua NF-A14 iPPC-3000 PWM
Mouse Steelseries Rival 600
Keyboard Corsair K95 RGB
Software Microsoft Windows 10 Professional 64bit
If you want to go to 1/2" barbs I have a swiftech MCW30 that I used on the NB and a replacement SB heatsink if you are interested.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
If you want to go to 1/2" barbs I have a swiftech MCW30 that I used on the NB and a replacement SB heatsink if you are interested.

Thanks for the offer man. I think I'll wait awhile before I dive any deeper into this. I'll just enjoy my loop for awhile!
 
Joined
Aug 28, 2008
Messages
1,341 (0.24/day)
Location
USA
Processor Intel® Core™ i7-8700K CPU @ 3.70GHz
Motherboard EVGA 121-KS-E375
Cooling Stock (Temp.)
Memory GEIL 8192 MB X2 (DDR4-2137) - XMP 2.0 - P/N: CL16-16-16 D4-2400
Video Card(s) NVIDIA GeForce RTX 2070 SUPER (TU104-410)
Storage Samsung SSD 860 EVO 1TB & Samsung SSD 950 PRO 256GB
Display(s) LG 32" Widescreen
Case Corsair Carbide Series 400
Audio Device(s) Onboard
Power Supply Corsair HX850 Platinum
Mouse Razer Viper Ultimate
Keyboard DAS
Software Windows 10 20H2 64 Bit
how much did your cpu and NB temps fall?
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I traded my Asus Maximus, and now have a DFI x48. So, I'm reworking my WC loop. This time I've decided to mount my rad to the bottom, and move the psu to the top. I've also moved the pump to the bottom of the HDD bays. I cracked my micro res, but I'm planning to mount a new res a 5 1/4" bay or in the bottom of the 5 1/4" bays w/ double sided tape. Thoughts on what res to get? It needs to be fairly small.



Cable management comes later. :)
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Newtekie1 suggested that instead of a new res, that it would be easier to add a T Line instead. Anyone have thoughts on this?
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
I'm guessing you went against the NB loop for now?
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I'm guessing you went against the NB loop for now?

Yeah, I don't have a NB block right now. That will come later.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Newtekie1 suggested that instead of a new res, that it would be easier to add a T Line instead. Anyone have thoughts on this?

T lines are a bit harder to bleed. I prefer using a res, personally.
 
D

Deleted member 24505

Guest
I had mine on a t-line before i put my xspc restop back on,and it took nearly 2 days to bleed the air out of the t-line,and a couple of hours to bleed with the res top.
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
I had mine on a t-line before i put my xspc restop back on,and it took nearly 2 days to bleed the air out of the t-line,and a couple of hours to bleed with the res top.

I think I'm going to stick with a res. I just think it looks better, and less of a hassle to bleed it.
 

CyberDruid

New Member
Joined
Sep 23, 2007
Messages
2,887 (0.48/day)
Location
On top of a mountain
System Name Shop Dog
Processor E8400
Motherboard Asus Blitz Formula SE
Cooling d-Tek FuZion
Memory 2 x 2GB DDR2 800 G Skill
Video Card(s) EVGA 7900 GTX
Storage 150GB VelociRaptor
Display(s) Acer 21.5 1080p LED Back Lit Monitor
Case Working on it
Audio Device(s) PCI SoundMax
Power Supply Silverstone 750 Modular
Software XP Pro SP2
Benchmark Scores Super Pi 11.56s 1M at 4050mhz
http://www.performance-pcs.com/cata...e=product_info&cPath=59_318&products_id=22012

PPC used to have a "Tanky" branded acrylic Reservoir $10 cheaper than this with no brass inserts for the screws. I have not used XSPC stuff but I have used a number of these type of bay reservoirs.

http://www.petrastechshop.com/ekmure2.html

I have used lots of the EK 250 cylinder reservoirs. The make a shorter 150mm one too. The base has two side mounted ports which will often eliminate a tight bend and one bottom mounted port which can be a drain or a supply to the pump.

Rather than choose between reservoir and T Line I use both :D Seriously. And I usually use a Female-to-Female G-1/4 fitting to join the pump and res to eliminate one more tube. But the idea is you run the T line to the top of the case above the EK res and use a DD Delrin FilPort and now you do not have to open the case or undo the mounting screws or leave extra slack in the lopp to access the fill on the reservoir. Plus it bleeds really really fast. You simply leave the filport uncapped with some fluid in the line and air will pass up the line.

The clips that hold the cylinder can be mounted internally where you now have your 24 pin power cable. The FilPort can be located directly above in the top panel. The DB-1 pump (if that is what I see there) can be attached directly to the res and resting on a Gel Pad or a patch of velcro to absorb the sound.
 
Last edited:
K

kyle2020

Guest
So paulie, any updates on this new res situation?

I hope you realise your the one thats making me spend £150 odd on a WC loop myself, yours looked so good i just had to write up some plans :D
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
I alway run res>pump>cpu>rad>res.

In my old setup, I had the Rad front mounted on my Stacker, but mostly, I wanted to show you my pump and res setup, you can put your rad wherever it fits best.

http://img.techpowerup.org/070812/WileE2900.jpg

The pump is bolted to the floor of my case, and the res is bolted to the side of the drive bays, slightly higher than the pump.

thats sexy and gave me an idea for my case thank you :toast:
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.29/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
i just got dual magicool 150mL res's off XS have you looked at just getting a used one?
 
Joined
Feb 19, 2007
Messages
12,453 (1.99/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
i just got dual magicool 150mL res's off XS have you looked at just getting a used one?

I bought a DD 5.25 drive bay res from HET. I also had a friend here at TPU send me another Micro Res for free all the way from Scotland (you know who you are). I think I like the micro res better. It may sound weird, but the pump seems quieter when I use the Micro res. :confused:
 

CyberDruid

New Member
Joined
Sep 23, 2007
Messages
2,887 (0.48/day)
Location
On top of a mountain
System Name Shop Dog
Processor E8400
Motherboard Asus Blitz Formula SE
Cooling d-Tek FuZion
Memory 2 x 2GB DDR2 800 G Skill
Video Card(s) EVGA 7900 GTX
Storage 150GB VelociRaptor
Display(s) Acer 21.5 1080p LED Back Lit Monitor
Case Working on it
Audio Device(s) PCI SoundMax
Power Supply Silverstone 750 Modular
Software XP Pro SP2
Benchmark Scores Super Pi 11.56s 1M at 4050mhz
IT's quite possible. Gabe put a lot of thought into that design. I modded several by porting the bottom and retapping them to G-1/4 (1/4BSPP). I like to use about a 10" fill tube on the top port and I like to tap the bottom and use a short run direct to the pump inlet. The sideports I use the bottom for a return and just capoff the other. That little angled piece in there had one design flaw that Gabe has since corrected...it tends to trap a bubbleof air. He now makes them with alittle hole there to let the air up and out and (;)) he now ports thebottom and has the ports tapped G-1/4.

Hmmmm.
 
Top