- Joined
- Jun 30, 2008
- Messages
- 1,145 (0.20/day)
- Location
- England
System Name | Wasleys PC |
---|---|
Processor | Intel i5 2400 3.10GHz |
Motherboard | Asus P8z68-V |
Cooling | AC Freezer Pro |
Memory | Kingston 4GB (2x2GB) DDR3 Hyperx Memory |
Video Card(s) | HIS ATi 6850 1GB DDR3 |
Storage | Seagate ST3500320AS 500GB Hard Drive SATA II 7200rpm *32MB Cache* |
Case | Antec 900 with mods |
Audio Device(s) | On Board |
Power Supply | OCZ Stealth Xtream 500W |
Software | Windows 7 |
Hello all,
As you might of read in my previous posts, I'm building a new machine. This will be my first build and therefore - I might need a little help.
I'm okay with putting in: RAM, CPU, Heatsink, and the GPU but I've never put in the motherboard or powersupply.
Now - I'm sure the powersupply is pretty easy to fit. Slot it in and make sure the wires are hanging out and easy to access. But I'm sure the motherboards a diffrent story.
At first - I thought the motherboard was just a case of clipping it onto the case, adding the parts, turning on and wham bam. But unfortunatly, it doesnt seem that easy. Something to do with pins ?! Something - I have no idea about.
This is where I need TPU'ers help !
Below are the following parts I've ordered.
Intel Core 2 Duo E7300 - 2.66GHz
ATi 4850 512MB
2GB Ram
500GB H-Drive
MSI P43 Neo-F iP43 Socket 775 8 channel audio ATX Motherboard
OCZ Stealth Xtream 500W PSU
Antec 900
Now - I have all the parts apart from the case. But the delivery firm say that its currently at the depot and will be shipped out soon. I'll post once its arrived.
Anyone got any advice?
As you might of read in my previous posts, I'm building a new machine. This will be my first build and therefore - I might need a little help.
I'm okay with putting in: RAM, CPU, Heatsink, and the GPU but I've never put in the motherboard or powersupply.
Now - I'm sure the powersupply is pretty easy to fit. Slot it in and make sure the wires are hanging out and easy to access. But I'm sure the motherboards a diffrent story.
At first - I thought the motherboard was just a case of clipping it onto the case, adding the parts, turning on and wham bam. But unfortunatly, it doesnt seem that easy. Something to do with pins ?! Something - I have no idea about.
This is where I need TPU'ers help !
Below are the following parts I've ordered.
Intel Core 2 Duo E7300 - 2.66GHz
ATi 4850 512MB
2GB Ram
500GB H-Drive
MSI P43 Neo-F iP43 Socket 775 8 channel audio ATX Motherboard
OCZ Stealth Xtream 500W PSU
Antec 900
Now - I have all the parts apart from the case. But the delivery firm say that its currently at the depot and will be shipped out soon. I'll post once its arrived.
Anyone got any advice?