TazzMania
New Member
- Joined
- Dec 29, 2005
- Messages
- 39 (0.01/day)
Processor | AMD XP 2800 Barton @2193.53 Mhz |
---|---|
Motherboard | ABIT NF7 Ver 2.0 NForce-2 Ultra 400 |
Cooling | 3 Antec Case Fans , Antec CPU Fan |
Memory | Corsair TWINX512-3200 @ 350 Mhz |
Video Card(s) | Sapphire X800 GTO 256 Meg AGP (Not O/C) |
Storage | 3 Segate 120 Gig |
Display(s) | Sony 17 inch Flat panel |
Case | Antec |
Audio Device(s) | Nforce 2 onboard 5.1 |
Power Supply | Coolmaster 450w dual 12v Rails |
Just took my current system and installed some new cooling to aid with o/c the machine
New parts:
Here are the pre-mod motherboard pics
Pre-mod X800 GTO by Sapphire
Northbridge Cooler installed:
New Cables
Artic Cooling Ati Silencer installed
Laser Lights on the X800 GTO
and on the Northbridge cooler
Over all front and side of case
Still need to do some cosmetic wrap up inside and to fix the faceplate of the watt meter.
Airflow is greater and idle temps are down by 5-10 C.
Will post images of lasers (when dark) later on.
Tazz
New parts:
- Artic Cooling ATI Silencer 5 Rev 2
- Thermaltake A1899 Extreme Spirit North and South bridge cooler and heat sinks
- Additional 80mm intake fan in front of case
- PC toys ATA 133 18/24 inch round ide cables
- PC toys FDD 18 inch round cable
- Sunbeam Chameleon Laser Light controler w/4 lights (just for fun)
Here are the pre-mod motherboard pics
Pre-mod X800 GTO by Sapphire
Northbridge Cooler installed:
New Cables
Artic Cooling Ati Silencer installed
Laser Lights on the X800 GTO
and on the Northbridge cooler
Over all front and side of case
Still need to do some cosmetic wrap up inside and to fix the faceplate of the watt meter.
Airflow is greater and idle temps are down by 5-10 C.
Will post images of lasers (when dark) later on.
Tazz
Last edited: