MikeGolf
New Member
- Joined
- Jan 23, 2006
- Messages
- 7 (0.00/day)
Processor | AMD Athlon X2@4800+ |
---|---|
Motherboard | ASUS A8R32-MVP |
Cooling | Innovatec Water Cooling 2x MAXI radiators fanless |
Memory | 2GB Corsair 2,0-2-2-5 |
Video Card(s) | Sapphire X1900 XT @ 690/800 1.1 ns ram chips |
Storage | 3xSATA ~ 700 GB |
Display(s) | 19" CRT for gaming and 19" TFT for office |
Case | Tower |
Audio Device(s) | onboard |
Power Supply | 600W Seasonic SLI/Crossfire |
Software | Win XP Prof. |
Hello!
First of all thanks for this great tool. I am a programmer myself and i know how much work it is to develop such a tool.
My hardware is the following:
ASUS A8R-MVP Crossfire board with ATI Radeon XPress 200 Crossfire chipset and ULi M1575 Southbridge. CPU AMD Athlon 64 X2 4800+. 2 graphic cards 1 master card MSI RX850XT and 1 slave card Sapphire X850XT. Both work together without any problem. By the way 3DMark05 is 10746 points without overclocking.
My problem with the tool:
It is not possible to overclock and test the slave card. Only if i remove one card physically from the motherboard. The 3Dview of the tool is not running faster in crossfire modus then in single modus. The 3DView is running always on the mastercard even if i select the second(slave), which i can see on the temperature.
bye Gerhard
First of all thanks for this great tool. I am a programmer myself and i know how much work it is to develop such a tool.
My hardware is the following:
ASUS A8R-MVP Crossfire board with ATI Radeon XPress 200 Crossfire chipset and ULi M1575 Southbridge. CPU AMD Athlon 64 X2 4800+. 2 graphic cards 1 master card MSI RX850XT and 1 slave card Sapphire X850XT. Both work together without any problem. By the way 3DMark05 is 10746 points without overclocking.
My problem with the tool:
It is not possible to overclock and test the slave card. Only if i remove one card physically from the motherboard. The 3Dview of the tool is not running faster in crossfire modus then in single modus. The 3DView is running always on the mastercard even if i select the second(slave), which i can see on the temperature.
bye Gerhard