- Joined
- Dec 5, 2007
- Messages
- 5,214 (0.87/day)
System Name | Addison Clark |
---|---|
Processor | Ryzen 9 7950x3D delid |
Motherboard | Asus X670E Hero |
Cooling | Custom Bykski loop CPU, GPU, 2x 360 rads, and 1x 280 rad with Arctic P12 and P14 ARGB fans |
Memory | G.Skill DDR5-6000 64GB CL30 |
Video Card(s) | Gigabyte 4090 Aorus Master |
Storage | Kingston Fury 2TB and 4TB NVME |
Display(s) | Samsung 57" |
Case | Lian Li O11 mini |
Audio Device(s) | Onboard |
Power Supply | Thermaltake 1000w SFX-L |
Mouse | Corsair Dark Core RGB SE |
Keyboard | Corsair K95 Platnium |
Software | Win 11 Pro |
Earlier this week I bought a dead 940 from Shadowfold for a little experimentation. Today at work it was DEAD so I got out the exacto knife and a lighter.
Here is the IHS:
IHS and proc:
Close up of the proc:
Some pics of the solder sanded off. I only had 220, 320, 400, and 600grit paper on hand:
Friday I'm going to try using the proc w/o the ihs to see if it will work cause when it popped off there was white shit all over the pcb so maybe some paste got in there or no telling what Shadow did to it...
Here is the IHS:
IHS and proc:
Close up of the proc:
Some pics of the solder sanded off. I only had 220, 320, 400, and 600grit paper on hand:
Friday I'm going to try using the proc w/o the ihs to see if it will work cause when it popped off there was white shit all over the pcb so maybe some paste got in there or no telling what Shadow did to it...
Last edited: